diff options
Diffstat (limited to 'texmf/doc/latex/revtex/sample/aps')
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/apssamp.bib | 484 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/apssamp.pdf | bin | 356378 -> 0 bytes | |||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/apssamp.tex | 753 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/apstemplate.tex | 173 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/fig_1.eps | 5 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/fig_2.eps | 5 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/vid_1a.eps | 5 | ||||
| -rw-r--r-- | texmf/doc/latex/revtex/sample/aps/vid_1b.eps | 5 |
8 files changed, 0 insertions, 1430 deletions
diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.bib b/texmf/doc/latex/revtex/sample/aps/apssamp.bib deleted file mode 100644 index ff2eace..0000000 --- a/texmf/doc/latex/revtex/sample/aps/apssamp.bib +++ /dev/null @@ -1,484 +0,0 @@ -@PREAMBLE{ - "\providecommand{\noopsort}[1]{}" - # "\providecommand{\singleletter}[1]{#1}%" -} - -@BOOK{Bire82, - author = {N. D. Birell and P. C. W. Davies}, - year = 1982, - title = {Quantum Fields in Curved Space}, - publisher = {Cambridge University Press} -} - -@ARTICLE{feyn54, - author = "R. P. Feynman", - year = "1954", - journal = "Phys.\ Rev.", - volume = "94", - pages = "262", -} - -@ARTICLE{epr, - author = "A. Einstein and {\relax Yu} Podolsky and N. Rosen", - collaboration = "EPR", - year = "1935", - journal = "Phys.\ Rev.", - volume = "47", - pages = "777", -} - -@ARTICLE{Berman1983, - author = "G. P. Berman, Jr. and F. M. Izrailev, Jr.", - title = "Stability of nonlinear modes", - journal = "Physica D", - volume = "88", - pages = "445", - year = "1983", -} - -@ARTICLE{Davies1998, - author = "E. B. Davies and L. Parns", - title = "Trapped modes in acoustic waveguides", - journal = "Q. J. Mech. Appl. Math.", - volume = "51", - pages = "477--492", - year = "1988", -} - -@MISC{witten2001, - author = "Edward Witten", - eprint = "hep-th/0106109", - year = "2001", -} - -@INBOOK{Beutler1994, - author = "E. Beutler", - editor = "E. Beutler and M. A. Lichtman and B. W. Coller and T. S. Kipps", - booktitle = "Williams Hematology", - chapter = "7", - pages = "654--662", - publisher = "McGraw-Hill", - year = "1994", - - edition = "5", - address = "New York", - volume = "2", -} - -@INCOLLECTION{Beutler1994a, - author = "E. Beutler", - editor = "E. Beutler and M. A. Lichtman and B. W. Coller and T. S. Kipps", - booktitle = "Williams Hematology", - chapter = "7", - pages = "654--662", - publisher = "McGraw-Hill", - year = "1994", - - edition = "5", - address = "New York", - volume = "2", -} - -@INBOOK{inbook-full, - author = "Donald E. Knuth", - booktitle = "Fundamental Algorithms", - volume = 1, - series = "The Art of Computer Programming", - publisher = "Addison-Wesley", - address = "Reading, Massachusetts", - edition = "Second", - month = "10~" # jan, - year = "\noopsort{1973b}1973", - type = "Section", - chapter = "1.2", - pages = "10--119", - note = "A full INBOOK entry", -} - -@ARTICLE{Smith2005, - author = "J. S. Smith and G. W. Johnson", - journal = "Philos. Trans. R. Soc. London, Ser. B", - title = "", - year = "2005", - - volume = "777", - pages = "1395", -} - -@UNPUBLISHED{Smith2010, - author = "W. J. Smith and T. J. Johnson and B. G. Miller", - title = "Surface chemistry and preferential crystal orientation on a silicon surface", - note = "{J. Appl. Phys.} (unpublished)", - - month = "", - year = "2010", -} - -@UNPUBLISHED{Smith2010a, - author = "V. K. Smith and K. Johnson and M. O. Klein", - title = "Surface chemistry and preferential crystal orientation on a silicon surface", - note = "{J. Appl. Phys.} (submitted)", - - month = "", - year = "2010", -} - -@UNPUBLISHED{unpublished-full, - author = "Ulrich {\"{U}}nderwood and Ned {\~N}et and Paul {\={P}}ot", - title = "Lower Bounds for Wishful Research Results", - month = nov # ", " # dec, - year = 1988, - note = "Talk at Fanstord University (A full UNPUBLISHED entry)", -} - -@MISC{JohnsonMillerSmith2007, - - author = "M. P. Johnson and K. L. Miller and K. Smith", - title = "", - howpublished = "personal communication", - month = "1~" # may, - year = "2007", - note = "", -} - -@PROCEEDINGS{Smith2007, - title = "AIP Conf. Proc.", - year = "2007", - - editor = "J. Smith", - volume = "841", - number = "21", - series = "", - address = "", - month = "", - organization = "", - publisher = "", - note = "", -} - -@PROCEEDINGS{proceedings-full, - editor = "Wizard V. Oz and Mihalis Yannakakis", - title = "Proc. Fifteenth Annual", - number = 17, - series = "All ACM Conferences", - month = mar, - year = 1983, - address = "Boston", - organization = "ACM", - publisher = "Academic Press", - note = "A full PROCEEDINGS entry", -} - -@UNPUBLISHED{Burstyn2004, - author = "Y. Burstyn", - title = "{Proceedings of the 5th International Molecular Beam Epitaxy Conference, Santa Fe, NM}", - note = "(unpublished)", - - month = "5--8~" # oct, - year = "2004", -} - -@PROCEEDINGS{Quinn2001, - title = "{Proceedings of the 2003 Particle Accelerator Conference, Portland, OR, 12-16 May 2005}", - year = "2001", - - editor = "B. Quinn", - address = "New York", - publisher = "Wiley", - note = "Albeit the conference was held in 2005, it was the 2003 conference, and the proceedings were published in 2001; go figure", -} - -@ARTICLE{Agarwal2001, - author = "A. G. Agarwal", - title = "{Proceedings of the Fifth Low Temperature Conference, Madison, WI, 1999}", - journal = "Semiconductors", - year = "2001", - - volume = "66", - pages = "1238", -} - -@ARTICLE{SmithDA01, - author = "R. Smith", - title = "Hummingbirds are our friends", - journal = {J. Appl. Phys. (these proceedings)}, - year = "2001", - volume = "", - number = "", - pages = "", - month = "", - note = "Abstract No. DA-01", -} - -@ARTICLE{Smith2007a, - author = "J. Smith", - title = "", - journal = "Proc. SPIE", - year = "2007", - - volume = "124", - pages = "367", - note = "Required title is missing", -} - -@TECHREPORT{techreport-full, - author = "Tom T{\'{e}}rrific", - title = "An {$O(n \log n / \! \log\log n)$} Sorting Algorithm", - institution = "Fanstord University", - type = "Wishful Research Result", - number = "7", - address = "Computer Science Department, Fanstord, California", - month = oct, - year = 1988, - note = "A full TECHREPORT entry", -} - -@TECHREPORT{Nelson1999, - author = "J. Nelson", - type = "{TWI Report}", - number = "666/1999", - institution = "", - year = jan # "~1999", - - note = "Required institution missing", -} - -@TECHREPORT{Fields2005, - author = "W. K. Fields", - type = "{ECE Report No.}", - number = "AL944", - institution = "", - year = "2005", - - note = "Required institution missing", -} - -@MISC{Zalkins2008, - - author = "Y. M. Zalkins", - title = "", - howpublished = "e-print arXiv:cond-mat/040426", - month = "", - year = "2008", - note = "", -} - -@MISC{Nelson2005, - - author = "J. Nelson", - howpublished = "{U.S. Patent No.} 5,693,000", - year = "12~" # dec # "~2005", -} - -@MASTERSTHESIS{Nelson1999a, - author = "J. K. Nelson", - title = "", - school = "New York University", - year = "1999", - - type = "M.{S}. thesis", - address = "", - month = "", - note = "", -} - -@MASTERSTHESIS{mastersthesis-full, - author = "{\'{E}}douard Masterly", - title = "Mastering Thesis Writing", - school = "Stanford University", - type = "Master's project", - address = "English Department", - month = jun # "-" # aug, - year = 1988, - note = "A full MASTERSTHESIS entry", -} - -@PHDTHESIS{Smith2003, - author = "S. M. Smith", - title = "", - school = "Massachusetts Institute of Technology", - year = "2003", - - type = "{Ph.D.} thesis", - address = "", - month = "", - note = "", -} - -@ARTICLE{KawaLin2003, - author = "S. R. Kawa and S.-J. Lin", - title = "", - journal = "J. Geophys. Res.", - year = "2003", - - volume = "108", - number = "D6", - pages = "4201", - month = "", - note = "{DOI:10.1029/2002JD002268}", -} - -@PHDTHESIS{phdthesis-full, - author = "F. Phidias Phony-Baloney", - title = "Fighting Fire with Fire: Festooning {F}rench Phrases", - school = "Fanstord University", - type = "{PhD} Dissertation", - address = "Department of French", - month = jun # "-" # aug, - year = 1988, - note = "A full PHDTHESIS entry", -} - -@BOOK{book-full, - author = "Donald E. Knuth", - title = "Seminumerical Algorithms", - volume = 2, - series = "The Art of Computer Programming", - publisher = "Addison-Wesley", - address = "Reading, Massachusetts", - edition = "Second", - month = "10~" # jan, - year = "\noopsort{1973c}1981", - note = "A full BOOK entry", -} - -@BOOKLET{booklet-full, - author = "Jill C. Knvth", - title = "The Programming of Computer Art", - howpublished = "Vernier Art Center", - address = "Stanford, California", - month = feb, - year = 1988, - note = "A full BOOKLET entry", -} - -@INBOOK{ballagh2000, - author = "R. Ballagh and C.M. Savage", - editor = "C.M. Savage and M. Das", - title = "Bose-Einstein condensation: from atomic physics to quantum fluids, Proceedings of the 13th Physics Summer School", - year = "2000", - publisher = "World Scientific", - address = "Singapore", - eprint = "cond-mat/0008070", -} - -@INCOLLECTION{ballagh2000a, - author = "R. Ballagh and C.M. Savage", - title = "Bose-Einstein condensation: from atomic physics to quantum fluids", - editor = "C.M. Savage and M. Das", - booktitle = "Proceedings of the 13th Physics Summer School", - year = "2000", - publisher = "World Scientific", - address = "Singapore", - eprint = "cond-mat/0008070", -} - -@inBook{Magnetism, - author = "W. Opechowski and R. Guccione", - title = "Introduction to the Theory of Normal Metals", - volume = "IIa", - pages = "105", - editor = "G. T. Rado and H. Suhl", - booktitle = "Magnetism", - publisher = "Academic Press", - address = "New York", - year = "1965", -} - -@INCOLLECTION{Magnetisma, - author = "W. Opechowski and R. Guccione", - title = "Introduction to the Theory of Normal Metals", - editor = "G. T. Rado and H. Suhl", - booktitle = "Magnetism", - volume = "IIa", - pages = "105", - publisher = "Academic Press", - address = "New York", - year = "1965", -} - -@INPROCEEDINGS{Magnetismb, - author = "W. Opechowski and R. Guccione", - title = "Introduction to the Theory of Normal Metals", - editor = "G. T. Rado and H. Suhl", - booktitle = "Magnetism", - volume = "IIa", - pages = "105", - publisher = "Academic Press", - address = "New York", - year = "1965", -} - -@INBOOK{Smith80, - author = "J. M. Smith", - title = "Molecular Dynamics", - publisher = "Academic", - year = "1980", - address = "New York", - editor = "C. Brown", -} - -@article{ZS71, - author = "V. E. Zakharov and A. B. Shabat", - title = "Exact theory of two-dimensional self-focusing and one-dimensional self-modulation of waves in nonlinear media", - journal = "Zh. Eksp. Teor. Fiz.", - volume = "61", - year = "1971", - pages = "118--134", - translation = "Sov. Phys. JETP \textbf{34}, 62 (1972)" -} - -@INCOLLECTION{Smith80a, - author = "J. M. Smith", - booktitle = "Molecular Dynamics", - editor = "C. Brown", - publisher = "Academic", - year = "1980", - address = "New York", -} - -@INCOLLECTION{incollection-full, - author = "Daniel D. Lincoll", - title = "Semigroups of Recurrences", - editor = "David J. Lipcoll and D. H. Lawrie and A. H. Sameh", - booktitle = "High Speed Computer and Algorithm Organization", - number = 23, - series = "Fast Computers", - chapter = 3, - type = "Part", - pages = "179--183", - publisher = "Academic Press", - address = "New York", - edition = "Third", - month = sep, - year = 1977, - note = "A full INCOLLECTION entry", -} - -@INPROCEEDINGS{inproceedings-full, - author = "Alfred V. Oaho and Jeffrey D. Ullman and Mihalis Yannakakis", - title = "On Notions of Information Transfer in {VLSI} Circuits", - editor = "Wizard V. Oz and Mihalis Yannakakis", - booktitle = "Proc. Fifteenth Annual ACM", - bookaddress = "Boston, 1982", - number = 17, - series = "All ACM Conferences", - pages = "133--139", - month = mar, - year = 1983, - address = "New York", - organization = "ACM", - publisher = "Academic Press", - note = "A full INPROCEDINGS entry", -} - -@MANUAL{manual-full, - author = "Larry Manmaker", - title = "The Definitive Computer Manual", - organization = "Chips-R-Us", - address = "Silicon Valley", - edition = "Silver", - month = apr # "-" # may, - year = 1986, - note = "A full MANUAL entry", -} diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.pdf b/texmf/doc/latex/revtex/sample/aps/apssamp.pdf Binary files differdeleted file mode 100644 index 3e11f39..0000000 --- a/texmf/doc/latex/revtex/sample/aps/apssamp.pdf +++ /dev/null diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.tex b/texmf/doc/latex/revtex/sample/aps/apssamp.tex deleted file mode 100644 index ae2eb52..0000000 --- a/texmf/doc/latex/revtex/sample/aps/apssamp.tex +++ /dev/null @@ -1,753 +0,0 @@ -% ****** Start of file apssamp.tex ****** -% -% This file is part of the APS files in the REVTeX 4.2 distribution. -% Version 4.2a of REVTeX, December 2014 -% -% Copyright (c) 2014 The American Physical Society. -% -% See the REVTeX 4 README file for restrictions and more information. -% -% TeX'ing this file requires that you have AMS-LaTeX 2.0 installed -% as well as the rest of the prerequisites for REVTeX 4.2 -% -% See the REVTeX 4 README file -% It also requires running BibTeX. The commands are as follows: -% -% 1) latex apssamp.tex -% 2) bibtex apssamp -% 3) latex apssamp.tex -% 4) latex apssamp.tex -% -\documentclass[% - reprint, -%superscriptaddress, -%groupedaddress, -%unsortedaddress, -%runinaddress, -%frontmatterverbose, -%preprint, -%preprintnumbers, -%nofootinbib, -%nobibnotes, -%bibnotes, - amsmath,amssymb, - aps, -%pra, -%prb, -%rmp, -%prstab, -%prstper, -%floatfix, -]{revtex4-2} - -\usepackage{graphicx}% Include figure files -\usepackage{dcolumn}% Align table columns on decimal point -\usepackage{bm}% bold math -%\usepackage{hyperref}% add hypertext capabilities -%\usepackage[mathlines]{lineno}% Enable numbering of text and display math -%\linenumbers\relax % Commence numbering lines - -%\usepackage[showframe,%Uncomment any one of the following lines to test -%%scale=0.7, marginratio={1:1, 2:3}, ignoreall,% default settings -%%text={7in,10in},centering, -%%margin=1.5in, -%%total={6.5in,8.75in}, top=1.2in, left=0.9in, includefoot, -%%height=10in,a5paper,hmargin={3cm,0.8in}, -%]{geometry} - -\begin{document} - -\preprint{APS/123-QED} - -\title{Manuscript Title:\\with Forced Linebreak}% Force line breaks with \\ -\thanks{A footnote to the article title}% - -\author{Ann Author} - \altaffiliation[Also at ]{Physics Department, XYZ University.}%Lines break automatically or can be forced with \\ -\author{Second Author}% - \email{Second.Author@institution.edu} -\affiliation{% - Authors' institution and/or address\\ - This line break forced with \textbackslash\textbackslash -}% - -\collaboration{MUSO Collaboration}%\noaffiliation - -\author{Charlie Author} - \homepage{http://www.Second.institution.edu/~Charlie.Author} -\affiliation{ - Second institution and/or address\\ - This line break forced% with \\ -}% -\affiliation{ - Third institution, the second for Charlie Author -}% -\author{Delta Author} -\affiliation{% - Authors' institution and/or address\\ - This line break forced with \textbackslash\textbackslash -}% - -\collaboration{CLEO Collaboration}%\noaffiliation - -\date{\today}% It is always \today, today, - % but any date may be explicitly specified - -\begin{abstract} -An article usually includes an abstract, a concise summary of the work -covered at length in the main body of the article. -\begin{description} -\item[Usage] -Secondary publications and information retrieval purposes. -\item[Structure] -You may use the \texttt{description} environment to structure your abstract; -use the optional argument of the \verb+\item+ command to give the category of each item. -\end{description} -\end{abstract} - -%\keywords{Suggested keywords}%Use showkeys class option if keyword - %display desired -\maketitle - -%\tableofcontents - -\section{\label{sec:level1}First-level heading:\protect\\ The line -break was forced \lowercase{via} \textbackslash\textbackslash} - -This sample document demonstrates proper use of REV\TeX~4.2 (and -\LaTeXe) in mansucripts prepared for submission to APS -journals. Further information can be found in the REV\TeX~4.2 -documentation included in the distribution or available at -\url{http://journals.aps.org/revtex/}. - -When commands are referred to in this example file, they are always -shown with their required arguments, using normal \TeX{} format. In -this format, \verb+#1+, \verb+#2+, etc. stand for required -author-supplied arguments to commands. For example, in -\verb+\section{#1}+ the \verb+#1+ stands for the title text of the -author's section heading, and in \verb+\title{#1}+ the \verb+#1+ -stands for the title text of the paper. - -Line breaks in section headings at all levels can be introduced using -\textbackslash\textbackslash. A blank input line tells \TeX\ that the -paragraph has ended. Note that top-level section headings are -automatically uppercased. If a specific letter or word should appear in -lowercase instead, you must escape it using \verb+\lowercase{#1}+ as -in the word ``via'' above. - -\subsection{\label{sec:level2}Second-level heading: Formatting} - -This file may be formatted in either the \texttt{preprint} or -\texttt{reprint} style. \texttt{reprint} format mimics final journal output. -Either format may be used for submission purposes. \texttt{letter} sized paper should -be used when submitting to APS journals. - -\subsubsection{Wide text (A level-3 head)} -The \texttt{widetext} environment will make the text the width of the -full page, as on page~\pageref{eq:wideeq}. (Note the use the -\verb+\pageref{#1}+ command to refer to the page number.) -\paragraph{Note (Fourth-level head is run in)} -The width-changing commands only take effect in two-column formatting. -There is no effect if text is in a single column. - -\subsection{\label{sec:citeref}Citations and References} -A citation in text uses the command \verb+\cite{#1}+ or -\verb+\onlinecite{#1}+ and refers to an entry in the bibliography. -An entry in the bibliography is a reference to another document. - -\subsubsection{Citations} -Because REV\TeX\ uses the \verb+natbib+ package of Patrick Daly, -the entire repertoire of commands in that package are available for your document; -see the \verb+natbib+ documentation for further details. Please note that -REV\TeX\ requires version 8.31a or later of \verb+natbib+. - -\paragraph{Syntax} -The argument of \verb+\cite+ may be a single \emph{key}, -or may consist of a comma-separated list of keys. -The citation \emph{key} may contain -letters, numbers, the dash (-) character, or the period (.) character. -New with natbib 8.3 is an extension to the syntax that allows for -a star (*) form and two optional arguments on the citation key itself. -The syntax of the \verb+\cite+ command is thus (informally stated) -\begin{quotation}\flushleft\leftskip1em -\verb+\cite+ \verb+{+ \emph{key} \verb+}+, or\\ -\verb+\cite+ \verb+{+ \emph{optarg+key} \verb+}+, or\\ -\verb+\cite+ \verb+{+ \emph{optarg+key} \verb+,+ \emph{optarg+key}\ldots \verb+}+, -\end{quotation}\noindent -where \emph{optarg+key} signifies -\begin{quotation}\flushleft\leftskip1em -\emph{key}, or\\ -\texttt{*}\emph{key}, or\\ -\texttt{[}\emph{pre}\texttt{]}\emph{key}, or\\ -\texttt{[}\emph{pre}\texttt{]}\texttt{[}\emph{post}\texttt{]}\emph{key}, or even\\ -\texttt{*}\texttt{[}\emph{pre}\texttt{]}\texttt{[}\emph{post}\texttt{]}\emph{key}. -\end{quotation}\noindent -where \emph{pre} and \emph{post} is whatever text you wish to place -at the beginning and end, respectively, of the bibliographic reference -(see Ref.~[\onlinecite{witten2001}] and the two under Ref.~[\onlinecite{feyn54}]). -(Keep in mind that no automatic space or punctuation is applied.) -It is highly recommended that you put the entire \emph{pre} or \emph{post} portion -within its own set of braces, for example: -\verb+\cite+ \verb+{+ \texttt{[} \verb+{+\emph{text}\verb+}+\texttt{]}\emph{key}\verb+}+. -The extra set of braces will keep \LaTeX\ out of trouble if your \emph{text} contains the comma (,) character. - -The star (*) modifier to the \emph{key} signifies that the reference is to be -merged with the previous reference into a single bibliographic entry, -a common idiom in APS and AIP articles (see below, Ref.~[\onlinecite{epr}]). -When references are merged in this way, they are separated by a semicolon instead of -the period (full stop) that would otherwise appear. - -\paragraph{Eliding repeated information} -When a reference is merged, some of its fields may be elided: for example, -when the author matches that of the previous reference, it is omitted. -If both author and journal match, both are omitted. -If the journal matches, but the author does not, the journal is replaced by \emph{ibid.}, -as exemplified by Ref.~[\onlinecite{epr}]. -These rules embody common editorial practice in APS and AIP journals and will only -be in effect if the markup features of the APS and AIP Bib\TeX\ styles is employed. - -\paragraph{The options of the cite command itself} -Please note that optional arguments to the \emph{key} change the reference in the bibliography, -not the citation in the body of the document. -For the latter, use the optional arguments of the \verb+\cite+ command itself: -\verb+\cite+ \texttt{*}\allowbreak -\texttt{[}\emph{pre-cite}\texttt{]}\allowbreak -\texttt{[}\emph{post-cite}\texttt{]}\allowbreak -\verb+{+\emph{key-list}\verb+}+. - -\subsubsection{Example citations} -By default, citations are numerical\cite{Beutler1994}. -Author-year citations are used when the journal is RMP. -To give a textual citation, use \verb+\onlinecite{#1}+: -Refs.~\onlinecite{[][{, and references therein}]witten2001,Bire82}. -By default, the \texttt{natbib} package automatically sorts your citations into numerical order and ``compresses'' runs of three or more consecutive numerical citations. -REV\TeX\ provides the ability to automatically change the punctuation when switching between journal styles that provide citations in square brackets and those that use a superscript style instead. This is done through the \texttt{citeautoscript} option. For instance, the journal style \texttt{prb} automatically invokes this option because \textit{Physical -Review B} uses superscript-style citations. The effect is to move the punctuation, which normally comes after a citation in square brackets, to its proper position before the superscript. -To illustrate, we cite several together -\cite{[See the explanation of time travel in ]feyn54,*[The classical relativistic treatment of ][ is a relative classic]epr,witten2001,Berman1983,Davies1998,Bire82}, -and once again in different order (Refs.~\cite{epr,feyn54,Bire82,Berman1983,witten2001,Davies1998}). -Note that the citations were both compressed and sorted. Futhermore, running this sample file under the \texttt{prb} option will move the punctuation to the correct place. - -When the \verb+prb+ class option is used, the \verb+\cite{#1}+ command -displays the reference's number as a superscript rather than in -square brackets. Note that the location of the \verb+\cite{#1}+ -command should be adjusted for the reference style: the superscript -references in \verb+prb+ style must appear after punctuation; -otherwise the reference must appear before any punctuation. This -sample was written for the regular (non-\texttt{prb}) citation style. -The command \verb+\onlinecite{#1}+ in the \texttt{prb} style also -displays the reference on the baseline. - -\subsubsection{References} -A reference in the bibliography is specified by a \verb+\bibitem{#1}+ command -with the same argument as the \verb+\cite{#1}+ command. -\verb+\bibitem{#1}+ commands may be crafted by hand or, preferably, -generated by Bib\TeX. -REV\TeX~4.2 includes Bib\TeX\ style files -\verb+apsrev4-2.bst+, \verb+apsrmp4-2.bst+ appropriate for -\textit{Physical Review} and \textit{Reviews of Modern Physics}, -respectively. - -\subsubsection{Example references} -This sample file employs the \verb+\bibliography+ command, -which formats the \texttt{\jobname .bbl} file -and specifies which bibliographic databases are to be used by Bib\TeX\ -(one of these should be by arXiv convention \texttt{\jobname .bib}). -Running Bib\TeX\ (via \texttt{bibtex \jobname}) -after the first pass of \LaTeX\ produces the file -\texttt{\jobname .bbl} which contains the automatically formatted -\verb+\bibitem+ commands (including extra markup information via -\verb+\bibinfo+ and \verb+\bibfield+ commands). -If not using Bib\TeX, you will have to create the \verb+thebibiliography+ environment -and its \verb+\bibitem+ commands by hand. - -Numerous examples of the use of the APS bibliographic entry types appear in the bibliography of this sample document. -You can refer to the \texttt{\jobname .bib} file, -and compare its information to the formatted bibliography itself. - -\subsection{Footnotes}% -Footnotes, produced using the \verb+\footnote{#1}+ command, -usually integrated into the bibliography alongside the other entries. -Numerical citation styles do this% -\footnote{Automatically placing footnotes into the bibliography requires using BibTeX to compile the bibliography.}; -author-year citation styles place the footnote at the bottom of the text column. -Note: due to the method used to place footnotes in the bibliography, -\emph{you must re-run Bib\TeX\ every time you change any of your document's footnotes}. - -\section{Math and Equations} -Inline math may be typeset using the \verb+$+ delimiters. Bold math -symbols may be achieved using the \verb+bm+ package and the -\verb+\bm{#1}+ command it supplies. For instance, a bold $\alpha$ can -be typeset as \verb+$\bm{\alpha}$+ giving $\bm{\alpha}$. Fraktur and -Blackboard (or open face or double struck) characters should be -typeset using the \verb+\mathfrak{#1}+ and \verb+\mathbb{#1}+ commands -respectively. Both are supplied by the \texttt{amssymb} package. For -example, \verb+$\mathbb{R}$+ gives $\mathbb{R}$ and -\verb+$\mathfrak{G}$+ gives $\mathfrak{G}$ - -In \LaTeX\ there are many different ways to display equations, and a -few preferred ways are noted below. Displayed math will center by -default. Use the class option \verb+fleqn+ to flush equations left. - -Below we have numbered single-line equations; this is the most common -type of equation in \textit{Physical Review}: -\begin{eqnarray} -\chi_+(p)\alt{\bf [}2|{\bf p}|(|{\bf p}|+p_z){\bf ]}^{-1/2} -\left( -\begin{array}{c} -|{\bf p}|+p_z\\ -px+ip_y -\end{array}\right)\;, -\\ -\left\{% - \openone234567890abc123\alpha\beta\gamma\delta1234556\alpha\beta - \frac{1\sum^{a}_{b}}{A^2}% -\right\}% -\label{eq:one}. -\end{eqnarray} -Note the open one in Eq.~(\ref{eq:one}). - -Not all numbered equations will fit within a narrow column this -way. The equation number will move down automatically if it cannot fit -on the same line with a one-line equation: -\begin{equation} -\left\{ - ab12345678abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta - \frac{1\sum^{a}_{b}}{A^2}% -\right\}. -\end{equation} - -When the \verb+\label{#1}+ command is used [cf. input for -Eq.~(\ref{eq:one})], the equation can be referred to in text without -knowing the equation number that \TeX\ will assign to it. Just -use \verb+\ref{#1}+, where \verb+#1+ is the same name that used in -the \verb+\label{#1}+ command. - -Unnumbered single-line equations can be typeset -using the \verb+\[+, \verb+\]+ format: -\[g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow -q^+g^+g^+ \dots ~. \] - - -\subsection{Multiline equations} - -Multiline equations are obtained by using the \verb+eqnarray+ -environment. Use the \verb+\nonumber+ command at the end of each line -to avoid assigning a number: -\begin{eqnarray} -{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1} -\delta_{\sigma_1,-\sigma_2} -(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\ -&&\times -[\epsilon_jl_i\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1), -\end{eqnarray} -\begin{eqnarray} -\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2} - (N^2-1)\nonumber \\ - & &\times \left( \sum_{i<j}\right) - \sum_{\text{perm}} - \frac{1}{S_{12}} - \frac{1}{S_{12}} - \sum_\tau c^f_\tau~. -\end{eqnarray} -\textbf{Note:} Do not use \verb+\label{#1}+ on a line of a multiline -equation if \verb+\nonumber+ is also used on that line. Incorrect -cross-referencing will result. Notice the use \verb+\text{#1}+ for -using a Roman font within a math environment. - -To set a multiline equation without \emph{any} equation -numbers, use the \verb+\begin{eqnarray*}+, -\verb+\end{eqnarray*}+ format: -\begin{eqnarray*} -\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2} - (N^2-1)\\ - & &\times \left( \sum_{i<j}\right) - \left( - \sum_{\text{perm}}\frac{1}{S_{12}S_{23}S_{n1}} - \right) - \frac{1}{S_{12}}~. -\end{eqnarray*} - -To obtain numbers not normally produced by the automatic numbering, -use the \verb+\tag{#1}+ command, where \verb+#1+ is the desired -equation number. For example, to get an equation number of -(\ref{eq:mynum}), -\begin{equation} -g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow -q^+g^+g^+ \dots ~. \tag{2.6$'$}\label{eq:mynum} -\end{equation} - -\paragraph{A few notes on \texttt{tag}s} -\verb+\tag{#1}+ requires the \texttt{amsmath} package. -Place the \verb+\tag{#1}+ command before the \verb+\label{#1}+, if any. -The numbering produced by \verb+\tag{#1}+ \textit{does not affect} -the automatic numbering in REV\TeX; -therefore, the number must be known ahead of time, -and it must be manually adjusted if other equations are added. -\verb+\tag{#1}+ works with both single-line and multiline equations. -\verb+\tag{#1}+ should only be used in exceptional cases---% -do not use it to number many equations in your paper. -Please note that this feature of the \texttt{amsmath} package -is \emph{not} compatible with the \texttt{hyperref} (6.77u) package. - -Enclosing display math within -\verb+\begin{subequations}+ and \verb+\end{subequations}+ will produce -a set of equations that are labeled with letters, as shown in -Eqs.~(\ref{subeq:1}) and (\ref{subeq:2}) below. -You may include any number of single-line and multiline equations, -although it is probably not a good idea to follow one display math -directly after another. -\begin{subequations} -\label{eq:whole} -\begin{eqnarray} -{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1} -(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\ -&&\times -[\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1).\label{subeq:2} -\end{eqnarray} -\begin{equation} -\left\{ - abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta - \frac{1\sum^{a}_{b}}{A^2} -\right\},\label{subeq:1} -\end{equation} -\end{subequations} -Giving a \verb+\label{#1}+ command directly after the \verb+\begin{subequations}+, -allows you to reference all the equations in the \texttt{subequations} environment. -For example, the equations in the preceding subequations environment were -Eqs.~(\ref{eq:whole}). - -\subsubsection{Wide equations} -The equation that follows is set in a wide format, i.e., it spans the full page. -The wide format is reserved for long equations -that cannot easily be set in a single column: -\begin{widetext} -\begin{equation} -{\cal R}^{(\text{d})}= - g_{\sigma_2}^e - \left( - \frac{[\Gamma^Z(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2} - +\frac{[\Gamma^Z(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2} - \right) - + x_WQ_e - \left( - \frac{[\Gamma^\gamma(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2} - +\frac{[\Gamma^\gamma(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2} - \right)\;. - \label{eq:wideeq} -\end{equation} -\end{widetext} -This is typed to show how the output appears in wide format. -(Incidentally, since there is no blank line between the \texttt{equation} environment above -and the start of this paragraph, this paragraph is not indented.) - -\section{Cross-referencing} -REV\TeX{} will automatically number such things as -sections, footnotes, equations, figure captions, and table captions. -In order to reference them in text, use the -\verb+\label{#1}+ and \verb+\ref{#1}+ commands. -To reference a particular page, use the \verb+\pageref{#1}+ command. - -The \verb+\label{#1}+ should appear -within the section heading, -within the footnote text, -within the equation, or -within the table or figure caption. -The \verb+\ref{#1}+ command -is used in text at the point where the reference is to be displayed. -Some examples: Section~\ref{sec:level1} on page~\pageref{sec:level1}, -Table~\ref{tab:table1},% -\begin{table}[b]%The best place to locate the table environment is directly after its first reference in text -\caption{\label{tab:table1}% -A table that fits into a single column of a two-column layout. -Note that REV\TeX~4 adjusts the intercolumn spacing so that the table fills the -entire width of the column. Table captions are numbered -automatically. -This table illustrates left-, center-, decimal- and right-aligned columns, -along with the use of the \texttt{ruledtabular} environment which sets the -Scotch (double) rules above and below the alignment, per APS style. -} -\begin{ruledtabular} -\begin{tabular}{lcdr} -\textrm{Left\footnote{Note a.}}& -\textrm{Centered\footnote{Note b.}}& -\multicolumn{1}{c}{\textrm{Decimal}}& -\textrm{Right}\\ -\colrule -1 & 2 & 3.001 & 4\\ -10 & 20 & 30 & 40\\ -100 & 200 & 300.0 & 400\\ -\end{tabular} -\end{ruledtabular} -\end{table} -and Fig.~\ref{fig:epsart}.% -\begin{figure}[b] -\includegraphics{fig_1}% Here is how to import EPS art -\caption{\label{fig:epsart} A figure caption. The figure captions are -automatically numbered.} -\end{figure} - -\section{Floats: Figures, Tables, Videos, etc.} -Figures and tables are usually allowed to ``float'', which means that their -placement is determined by \LaTeX, while the document is being typeset. - -Use the \texttt{figure} environment for a figure, the \texttt{table} environment for a table. -In each case, use the \verb+\caption+ command within to give the text of the -figure or table caption along with the \verb+\label+ command to provide -a key for referring to this figure or table. -The typical content of a figure is an image of some kind; -that of a table is an alignment.% -\begin{figure*} -\includegraphics{fig_2}% Here is how to import EPS art -\caption{\label{fig:wide}Use the figure* environment to get a wide -figure that spans the page in \texttt{twocolumn} formatting.} -\end{figure*} -\begin{table*} -\caption{\label{tab:table3}This is a wide table that spans the full page -width in a two-column layout. It is formatted using the -\texttt{table*} environment. It also demonstates the use of -\textbackslash\texttt{multicolumn} in rows with entries that span -more than one column.} -\begin{ruledtabular} -\begin{tabular}{ccccc} - &\multicolumn{2}{c}{$D_{4h}^1$}&\multicolumn{2}{c}{$D_{4h}^5$}\\ - Ion&1st alternative&2nd alternative&lst alternative -&2nd alternative\\ \hline - K&$(2e)+(2f)$&$(4i)$ &$(2c)+(2d)$&$(4f)$ \\ - Mn&$(2g)$\footnote{The $z$ parameter of these positions is $z\sim\frac{1}{4}$.} - &$(a)+(b)+(c)+(d)$&$(4e)$&$(2a)+(2b)$\\ - Cl&$(a)+(b)+(c)+(d)$&$(2g)$\footnotemark[1] - &$(4e)^{\text{a}}$\\ - He&$(8r)^{\text{a}}$&$(4j)^{\text{a}}$&$(4g)^{\text{a}}$\\ - Ag& &$(4k)^{\text{a}}$& &$(4h)^{\text{a}}$\\ -\end{tabular} -\end{ruledtabular} -\end{table*} - -Insert an image using either the \texttt{graphics} or -\texttt{graphix} packages, which define the \verb+\includegraphics{#1}+ command. -(The two packages differ in respect of the optional arguments -used to specify the orientation, scaling, and translation of the image.) -To create an alignment, use the \texttt{tabular} environment. - -The best place to locate the \texttt{figure} or \texttt{table} environment -is immediately following its first reference in text; this sample document -illustrates this practice for Fig.~\ref{fig:epsart}, which -shows a figure that is small enough to fit in a single column. - -In exceptional cases, you will need to move the float earlier in the document, as was done -with Table~\ref{tab:table3}: \LaTeX's float placement algorithms need to know -about a full-page-width float earlier. - -Fig.~\ref{fig:wide} -has content that is too wide for a single column, -so the \texttt{figure*} environment has been used.% -\begin{table}[b] -\caption{\label{tab:table4}% -Numbers in columns Three--Five are aligned with the ``d'' column specifier -(requires the \texttt{dcolumn} package). -Non-numeric entries (those entries without a ``.'') in a ``d'' column are aligned on the decimal point. -Use the ``D'' specifier for more complex layouts. } -\begin{ruledtabular} -\begin{tabular}{ccddd} -One&Two& -\multicolumn{1}{c}{\textrm{Three}}& -\multicolumn{1}{c}{\textrm{Four}}& -\multicolumn{1}{c}{\textrm{Five}}\\ -%\mbox{Three}&\mbox{Four}&\mbox{Five}\\ -\hline -one&two&\mbox{three}&\mbox{four}&\mbox{five}\\ -He&2& 2.77234 & 45672. & 0.69 \\ -C\footnote{Some tables require footnotes.} - &C\footnote{Some tables need more than one footnote.} - & 12537.64 & 37.66345 & 86.37 \\ -\end{tabular} -\end{ruledtabular} -\end{table} - -The content of a table is typically a \texttt{tabular} environment, -giving rows of type in aligned columns. -Column entries separated by \verb+&+'s, and -each row ends with \textbackslash\textbackslash. -The required argument for the \texttt{tabular} environment -specifies how data are aligned in the columns. -For instance, entries may be centered, left-justified, right-justified, aligned on a decimal -point. -Extra column-spacing may be be specified as well, -although REV\TeX~4 sets this spacing so that the columns fill the width of the -table. Horizontal rules are typeset using the \verb+\hline+ -command. The doubled (or Scotch) rules that appear at the top and -bottom of a table can be achieved enclosing the \texttt{tabular} -environment within a \texttt{ruledtabular} environment. Rows whose -columns span multiple columns can be typeset using the -\verb+\multicolumn{#1}{#2}{#3}+ command (for example, see the first -row of Table~\ref{tab:table3}).% - -Tables~\ref{tab:table1}, \ref{tab:table3}, \ref{tab:table4}, and \ref{tab:table2}% -\begin{table}[b] -\caption{\label{tab:table2} -A table with numerous columns that still fits into a single column. -Here, several entries share the same footnote. -Inspect the \LaTeX\ input for this table to see exactly how it is done.} -\begin{ruledtabular} -\begin{tabular}{cccccccc} - &$r_c$ (\AA)&$r_0$ (\AA)&$\kappa r_0$& - &$r_c$ (\AA) &$r_0$ (\AA)&$\kappa r_0$\\ -\hline -Cu& 0.800 & 14.10 & 2.550 &Sn\footnotemark[1] -& 0.680 & 1.870 & 3.700 \\ -Ag& 0.990 & 15.90 & 2.710 &Pb\footnotemark[2] -& 0.450 & 1.930 & 3.760 \\ -Au& 1.150 & 15.90 & 2.710 &Ca\footnotemark[3] -& 0.750 & 2.170 & 3.560 \\ -Mg& 0.490 & 17.60 & 3.200 &Sr\footnotemark[4] -& 0.900 & 2.370 & 3.720 \\ -Zn& 0.300 & 15.20 & 2.970 &Li\footnotemark[2] -& 0.380 & 1.730 & 2.830 \\ -Cd& 0.530 & 17.10 & 3.160 &Na\footnotemark[5] -& 0.760 & 2.110 & 3.120 \\ -Hg& 0.550 & 17.80 & 3.220 &K\footnotemark[5] -& 1.120 & 2.620 & 3.480 \\ -Al& 0.230 & 15.80 & 3.240 &Rb\footnotemark[3] -& 1.330 & 2.800 & 3.590 \\ -Ga& 0.310 & 16.70 & 3.330 &Cs\footnotemark[4] -& 1.420 & 3.030 & 3.740 \\ -In& 0.460 & 18.40 & 3.500 &Ba\footnotemark[5] -& 0.960 & 2.460 & 3.780 \\ -Tl& 0.480 & 18.90 & 3.550 & & & & \\ -\end{tabular} -\end{ruledtabular} -\footnotetext[1]{Here's the first, from Ref.~\onlinecite{feyn54}.} -\footnotetext[2]{Here's the second.} -\footnotetext[3]{Here's the third.} -\footnotetext[4]{Here's the fourth.} -\footnotetext[5]{And etc.} -\end{table} -show various effects. -A table that fits in a single column employs the \texttt{table} -environment. -Table~\ref{tab:table3} is a wide table, set with the \texttt{table*} environment. -Long tables may need to break across pages. -The most straightforward way to accomplish this is to specify -the \verb+[H]+ float placement on the \texttt{table} or -\texttt{table*} environment. -However, the \LaTeXe\ package \texttt{longtable} allows headers and footers to be specified for each page of the table. -A simple example of the use of \texttt{longtable} can be found -in the file \texttt{summary.tex} that is included with the REV\TeX~4 -distribution. - -There are two methods for setting footnotes within a table (these -footnotes will be displayed directly below the table rather than at -the bottom of the page or in the bibliography). The easiest -and preferred method is just to use the \verb+\footnote{#1}+ -command. This will automatically enumerate the footnotes with -lowercase roman letters. However, it is sometimes necessary to have -multiple entries in the table share the same footnote. In this case, -there is no choice but to manually create the footnotes using -\verb+\footnotemark[#1]+ and \verb+\footnotetext[#1]{#2}+. -\texttt{\#1} is a numeric value. Each time the same value for -\texttt{\#1} is used, the same mark is produced in the table. The -\verb+\footnotetext[#1]{#2}+ commands are placed after the \texttt{tabular} -environment. Examine the \LaTeX\ source and output for -Tables~\ref{tab:table1} and \ref{tab:table2} -for examples. - -Video~\ref{vid:PRSTPER.4.010101} -illustrates several features new with REV\TeX4.2, -starting with the \texttt{video} environment, which is in the same category with -\texttt{figure} and \texttt{table}.% -\begin{video} -\href{http://prst-per.aps.org/multimedia/PRSTPER/v4/i1/e010101/e010101_vid1a.mpg}{\includegraphics{vid_1a}}% - \quad -\href{http://prst-per.aps.org/multimedia/PRSTPER/v4/i1/e010101/e010101_vid1b.mpg}{\includegraphics{vid_1b}} - \setfloatlink{http://link.aps.org/multimedia/PRSTPER/v4/i1/e010101}% - \caption{\label{vid:PRSTPER.4.010101}% - Students explain their initial idea about Newton's third law to a teaching assistant. - Clip (a): same force. - Clip (b): move backwards. - }% -\end{video} -The \verb+\setfloatlink+ command causes the title of the video to be a hyperlink to the -indicated URL; it may be used with any environment that takes the \verb+\caption+ -command. -The \verb+\href+ command has the same significance as it does in the context of -the \texttt{hyperref} package: the second argument is a piece of text to be -typeset in your document; the first is its hyperlink, a URL. - -\textit{Physical Review} style requires that the initial citation of -figures or tables be in numerical order in text, so don't cite -Fig.~\ref{fig:wide} until Fig.~\ref{fig:epsart} has been cited. - -\begin{acknowledgments} -We wish to acknowledge the support of the author community in using -REV\TeX{}, offering suggestions and encouragement, testing new versions, -\dots. -\end{acknowledgments} - -\appendix - -\section{Appendixes} - -To start the appendixes, use the \verb+\appendix+ command. -This signals that all following section commands refer to appendixes -instead of regular sections. Therefore, the \verb+\appendix+ command -should be used only once---to setup the section commands to act as -appendixes. Thereafter normal section commands are used. The heading -for a section can be left empty. For example, -\begin{verbatim} -\appendix -\section{} -\end{verbatim} -will produce an appendix heading that says ``APPENDIX A'' and -\begin{verbatim} -\appendix -\section{Background} -\end{verbatim} -will produce an appendix heading that says ``APPENDIX A: BACKGROUND'' -(note that the colon is set automatically). - -If there is only one appendix, then the letter ``A'' should not -appear. This is suppressed by using the star version of the appendix -command (\verb+\appendix*+ in the place of \verb+\appendix+). - -\section{A little more on appendixes} - -Observe that this appendix was started by using -\begin{verbatim} -\section{A little more on appendixes} -\end{verbatim} - -Note the equation number in an appendix: -\begin{equation} -E=mc^2. -\end{equation} - -\subsection{\label{app:subsec}A subsection in an appendix} - -You can use a subsection or subsubsection in an appendix. Note the -numbering: we are now in Appendix~\ref{app:subsec}. - -Note the equation numbers in this appendix, produced with the -subequations environment: -\begin{subequations} -\begin{eqnarray} -E&=&mc, \label{appa} -\\ -E&=&mc^2, \label{appb} -\\ -E&\agt& mc^3. \label{appc} -\end{eqnarray} -\end{subequations} -They turn out to be Eqs.~(\ref{appa}), (\ref{appb}), and (\ref{appc}). - -% The \nocite command causes all entries in a bibliography to be printed out -% whether or not they are actually referenced in the text. This is appropriate -% for the sample file to show the different styles of references, but authors -% most likely will not want to use it. -\nocite{*} - -\bibliography{apssamp}% Produces the bibliography via BibTeX. - -\end{document} -% -% ****** End of file apssamp.tex ****** diff --git a/texmf/doc/latex/revtex/sample/aps/apstemplate.tex b/texmf/doc/latex/revtex/sample/aps/apstemplate.tex deleted file mode 100644 index 84d3435..0000000 --- a/texmf/doc/latex/revtex/sample/aps/apstemplate.tex +++ /dev/null @@ -1,173 +0,0 @@ -%% ****** Start of file apstemplate.tex ****** % -%% -%% -%% This file is part of the APS files in the REVTeX 4.2 distribution. -%% Version 4.2a of REVTeX, January, 2015 -%% -%% -%% Copyright (c) 2015 The American Physical Society. -%% -%% See the REVTeX 4 README file for restrictions and more information. -%% -% -% This is a template for producing manuscripts for use with REVTEX 4.2 -% Copy this file to another name and then work on that file. -% That way, you always have this original template file to use. -% -% Group addresses by affiliation; use superscriptaddress for long -% author lists, or if there are many overlapping affiliations. -% For Phys. Rev. appearance, change preprint to twocolumn. -% Choose pra, prb, prc, prd, pre, prl, prstab, prstper, or rmp for journal -% Add 'draft' option to mark overfull boxes with black boxes -% Add 'showkeys' option to make keywords appear -\documentclass[aps,prl,preprint,groupedaddress]{revtex4-2} -%\documentclass[aps,prl,preprint,superscriptaddress]{revtex4-2} -%\documentclass[aps,prl,reprint,groupedaddress]{revtex4-2} - -% You should use BibTeX and apsrev.bst for references -% Choosing a journal automatically selects the correct APS -% BibTeX style file (bst file), so only uncomment the line -% below if necessary. -%\bibliographystyle{apsrev4-2} - -\begin{document} - -% Use the \preprint command to place your local institutional report -% number in the upper righthand corner of the title page in preprint mode. -% Multiple \preprint commands are allowed. -% Use the 'preprintnumbers' class option to override journal defaults -% to display numbers if necessary -%\preprint{} - -%Title of paper -\title{} - -% repeat the \author .. \affiliation etc. as needed -% \email, \thanks, \homepage, \altaffiliation all apply to the current -% author. Explanatory text should go in the []'s, actual e-mail -% address or url should go in the {}'s for \email and \homepage. -% Please use the appropriate macro foreach each type of information - -% \affiliation command applies to all authors since the last -% \affiliation command. The \affiliation command should follow the -% other information -% \affiliation can be followed by \email, \homepage, \thanks as well. -\author{} -%\email[]{Your e-mail address} -%\homepage[]{Your web page} -%\thanks{} -%\altaffiliation{} -\affiliation{} - -%Collaboration name if desired (requires use of superscriptaddress -%option in \documentclass). \noaffiliation is required (may also be -%used with the \author command). -%\collaboration can be followed by \email, \homepage, \thanks as well. -%\collaboration{} -%\noaffiliation - -\date{\today} - -\begin{abstract} -% insert abstract here -\end{abstract} - -% insert suggested keywords - APS authors don't need to do this -%\keywords{} - -%\maketitle must follow title, authors, abstract, and keywords -\maketitle - -% body of paper here - Use proper section commands -% References should be done using the \cite, \ref, and \label commands -\section{} -% Put \label in argument of \section for cross-referencing -%\section{\label{}} -\subsection{} -\subsubsection{} - -% If in two-column mode, this environment will change to single-column -% format so that long equations can be displayed. Use -% sparingly. -%\begin{widetext} -% put long equation here -%\end{widetext} - -% figures should be put into the text as floats. -% Use the graphics or graphicx packages (distributed with LaTeX2e) -% and the \includegraphics macro defined in those packages. -% See the LaTeX Graphics Companion by Michel Goosens, Sebastian Rahtz, -% and Frank Mittelbach for instance. -% -% Here is an example of the general form of a figure: -% Fill in the caption in the braces of the \caption{} command. Put the label -% that you will use with \ref{} command in the braces of the \label{} command. -% Use the figure* environment if the figure should span across the -% entire page. There is no need to do explicit centering. - -% \begin{figure} -% \includegraphics{}% -% \caption{\label{}} -% \end{figure} - -% Surround figure environment with turnpage environment for landscape -% figure -% \begin{turnpage} -% \begin{figure} -% \includegraphics{}% -% \caption{\label{}} -% \end{figure} -% \end{turnpage} - -% tables should appear as floats within the text -% -% Here is an example of the general form of a table: -% Fill in the caption in the braces of the \caption{} command. Put the label -% that you will use with \ref{} command in the braces of the \label{} command. -% Insert the column specifiers (l, r, c, d, etc.) in the empty braces of the -% \begin{tabular}{} command. -% The ruledtabular enviroment adds doubled rules to table and sets a -% reasonable default table settings. -% Use the table* environment to get a full-width table in two-column -% Add \usepackage{longtable} and the longtable (or longtable*} -% environment for nicely formatted long tables. Or use the the [H] -% placement option to break a long table (with less control than -% in longtable). -% \begin{table}%[H] add [H] placement to break table across pages -% \caption{\label{}} -% \begin{ruledtabular} -% \begin{tabular}{} -% Lines of table here ending with \\ -% \end{tabular} -% \end{ruledtabular} -% \end{table} - -% Surround table environment with turnpage environment for landscape -% table -% \begin{turnpage} -% \begin{table} -% \caption{\label{}} -% \begin{ruledtabular} -% \begin{tabular}{} -% \end{tabular} -% \end{ruledtabular} -% \end{table} -% \end{turnpage} - -% Specify following sections are appendices. Use \appendix* if there -% only one appendix. -%\appendix -%\section{} - -% If you have acknowledgments, this puts in the proper section head. -%\begin{acknowledgments} -% put your acknowledgments here. -%\end{acknowledgments} - -% Create the reference section using BibTeX: -\bibliography{basename of .bib file} - -\end{document} -% -% ****** End of file apstemplate.tex ****** - diff --git a/texmf/doc/latex/revtex/sample/aps/fig_1.eps b/texmf/doc/latex/revtex/sample/aps/fig_1.eps deleted file mode 100644 index 2cd6074..0000000 --- a/texmf/doc/latex/revtex/sample/aps/fig_1.eps +++ /dev/null @@ -1,5 +0,0 @@ -%!PS-Adobe-3.0 -%%BoundingBox: 0 0 100 100 -0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke -20 50 moveto /Times-Roman findfont 10 scalefont setfont (Test Figure) show -%%EOF diff --git a/texmf/doc/latex/revtex/sample/aps/fig_2.eps b/texmf/doc/latex/revtex/sample/aps/fig_2.eps deleted file mode 100644 index eb637e2..0000000 --- a/texmf/doc/latex/revtex/sample/aps/fig_2.eps +++ /dev/null @@ -1,5 +0,0 @@ -%!PS-Adobe-3.0 -%%BoundingBox: 0 0 500 80 -0 0 moveto 500 0 lineto 500 80 lineto 0 80 lineto 0 0 lineto stroke -200 40 moveto /Times-Roman findfont 10 scalefont setfont (Wide Test Figure) show -%%EOF diff --git a/texmf/doc/latex/revtex/sample/aps/vid_1a.eps b/texmf/doc/latex/revtex/sample/aps/vid_1a.eps deleted file mode 100644 index 2388bd4..0000000 --- a/texmf/doc/latex/revtex/sample/aps/vid_1a.eps +++ /dev/null @@ -1,5 +0,0 @@ -%!PS-Adobe-3.0 -%%BoundingBox: 0 0 100 100 -0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke -20 50 moveto /Times-Roman findfont 10 scalefont setfont (Clip A Frame) show -%%EOF diff --git a/texmf/doc/latex/revtex/sample/aps/vid_1b.eps b/texmf/doc/latex/revtex/sample/aps/vid_1b.eps deleted file mode 100644 index a64a6dc..0000000 --- a/texmf/doc/latex/revtex/sample/aps/vid_1b.eps +++ /dev/null @@ -1,5 +0,0 @@ -%!PS-Adobe-3.0 -%%BoundingBox: 0 0 100 100 -0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke -20 50 moveto /Times-Roman findfont 10 scalefont setfont (Clip B Frame) show -%%EOF |