removed unused latex stuff

8 files changed, 0 insertions, 1430 deletions

diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.bib b/texmf/doc/latex/revtex/sample/aps/apssamp.bib
deleted file mode 100644
index ff2eace..0000000
--- a/texmf/doc/latex/revtex/sample/aps/apssamp.bib
+++ /dev/null
@@ -1,484 +0,0 @@
-@PREAMBLE{
- "\providecommand{\noopsort}[1]{}" 
- # "\providecommand{\singleletter}[1]{#1}%" 
-}
-
-@BOOK{Bire82,
-   author       = {N. D. Birell and P. C. W. Davies},
-   year         = 1982,
-   title        = {Quantum Fields in Curved Space},
-   publisher    = {Cambridge University Press}
-}
-
-@ARTICLE{feyn54,
-   author       = "R. P. Feynman",
-   year         = "1954",
-   journal      = "Phys.\ Rev.",
-   volume       = "94",
-   pages        = "262",
-}
-
-@ARTICLE{epr,
-   author       = "A. Einstein and {\relax Yu} Podolsky and N. Rosen", 
-   collaboration = "EPR",
-   year         = "1935", 
-   journal      = "Phys.\ Rev.", 
-   volume       = "47", 
-   pages        = "777",
-}
-
-@ARTICLE{Berman1983,
-   author       = "G. P. Berman, Jr. and F. M. Izrailev, Jr.",
-   title        = "Stability of nonlinear modes",
-   journal      = "Physica D",
-   volume       = "88", 
-   pages        = "445",
-   year         = "1983",
-}
-
-@ARTICLE{Davies1998,
-   author       = "E. B. Davies and L. Parns", 
-   title        = "Trapped modes in acoustic waveguides", 
-   journal      = "Q. J. Mech. Appl. Math.", 
-   volume       = "51", 
-   pages        = "477--492", 
-   year         = "1988", 
-}
-
-@MISC{witten2001,
-   author       = "Edward Witten",
-   eprint       = "hep-th/0106109",
-   year         = "2001",
-}
-
-@INBOOK{Beutler1994,
-   author       = "E. Beutler", 
-   editor       = "E. Beutler and M. A. Lichtman and B. W. Coller and T. S. Kipps", 
-   booktitle    = "Williams Hematology", 
-   chapter      = "7", 
-   pages        = "654--662",
-   publisher    = "McGraw-Hill", 
-   year         = "1994", 
-
-   edition      = "5", 
-   address      = "New York", 
-   volume       = "2", 
-}
-
-@INCOLLECTION{Beutler1994a,
-   author       = "E. Beutler", 
-   editor       = "E. Beutler and M. A. Lichtman and B. W. Coller and T. S. Kipps", 
-   booktitle    = "Williams Hematology", 
-   chapter      = "7", 
-   pages        = "654--662",
-   publisher    = "McGraw-Hill", 
-   year         = "1994", 
-
-   edition      = "5", 
-   address      = "New York", 
-   volume       = "2", 
-}
-
-@INBOOK{inbook-full,
-   author    = "Donald E. Knuth",
-   booktitle = "Fundamental Algorithms",
-   volume    = 1,
-   series    = "The Art of Computer Programming",
-   publisher = "Addison-Wesley",
-   address   = "Reading, Massachusetts",
-   edition   = "Second",
-   month     = "10~" # jan,
-   year      = "\noopsort{1973b}1973",
-   type      = "Section",
-   chapter   = "1.2",
-   pages     = "10--119",
-   note      = "A full INBOOK entry",
-}
-
-@ARTICLE{Smith2005,
-   author       = "J. S. Smith and G. W. Johnson", 
-   journal      = "Philos. Trans. R. Soc. London, Ser. B", 
-   title        = "", 
-   year         = "2005", 
-
-   volume       = "777", 
-   pages        = "1395",
-}
-
-@UNPUBLISHED{Smith2010,
-   author       = "W. J. Smith and T. J. Johnson and B. G. Miller", 
-   title        = "Surface chemistry and preferential crystal orientation on a silicon surface", 
-   note         = "{J. Appl. Phys.} (unpublished)", 
-   
-   month        = "", 
-   year         = "2010",
-}
-
-@UNPUBLISHED{Smith2010a,
-   author       = "V. K. Smith and K. Johnson and M. O. Klein", 
-   title        = "Surface chemistry and preferential crystal orientation on a silicon surface", 
-   note         = "{J. Appl. Phys.} (submitted)", 
-   
-   month        = "", 
-   year         = "2010",
-}
-
-@UNPUBLISHED{unpublished-full,
-   author = "Ulrich {\"{U}}nderwood and Ned {\~N}et and Paul {\={P}}ot",
-   title = "Lower Bounds for Wishful Research Results",
-   month = nov # ", " # dec,
-   year = 1988,
-   note = "Talk at Fanstord University (A full UNPUBLISHED entry)",
-}
-
-@MISC{JohnsonMillerSmith2007, 
-
-   author       = "M. P. Johnson and K. L. Miller and K. Smith", 
-   title        = "", 
-   howpublished = "personal communication", 
-   month        = "1~" # may, 
-   year         = "2007", 
-   note         = "",
-}
-
-@PROCEEDINGS{Smith2007, 
-   title        = "AIP Conf. Proc.", 
-   year         = "2007", 
-   
-   editor       = "J. Smith", 
-   volume       = "841", 
-   number       = "21", 
-   series       = "", 
-   address      = "", 
-   month        = "", 
-   organization = "", 
-   publisher    = "", 
-   note         = "", 
-}
-
-@PROCEEDINGS{proceedings-full,
-   editor = "Wizard V. Oz and Mihalis Yannakakis",
-   title = "Proc. Fifteenth Annual",
-   number = 17,
-   series = "All ACM Conferences",
-   month = mar,
-   year = 1983,
-   address = "Boston",
-   organization = "ACM",
-   publisher = "Academic Press",
-   note = "A full PROCEEDINGS entry",
-}
-
-@UNPUBLISHED{Burstyn2004,
-   author       = "Y. Burstyn", 
-   title        = "{Proceedings of the 5th International Molecular Beam Epitaxy Conference, Santa Fe, NM}", 
-   note         = "(unpublished)", 
-   
-   month        = "5--8~" # oct, 
-   year         = "2004",
-}
-
-@PROCEEDINGS{Quinn2001, 
-   title        = "{Proceedings of the 2003 Particle  Accelerator Conference, Portland, OR, 12-16 May 2005}", 
-   year         = "2001", 
-   
-   editor       = "B. Quinn", 
-   address      = "New York", 
-   publisher    = "Wiley", 
-   note         = "Albeit the conference was held in 2005, it was the 2003 conference, and  the proceedings were published in 2001; go figure", 
-}
-
-@ARTICLE{Agarwal2001,
-   author       = "A. G. Agarwal", 
-   title        = "{Proceedings of the Fifth Low Temperature Conference, Madison, WI, 1999}", 
-   journal      = "Semiconductors", 
-   year         = "2001", 
-
-   volume       = "66", 
-   pages        = "1238", 
-}
-
-@ARTICLE{SmithDA01,
-   author       = "R. Smith",
-   title        = "Hummingbirds are our friends",
-   journal      = {J. Appl. Phys. (these proceedings)},
-   year         = "2001",
-   volume       = "",
-   number       = "",
-   pages        = "",
-   month        = "",
-   note         = "Abstract No. DA-01",
-}
-
-@ARTICLE{Smith2007a, 
-   author       = "J. Smith", 
-   title        = "", 
-   journal      = "Proc. SPIE", 
-   year         = "2007", 
-
-   volume       = "124", 
-   pages        = "367", 
-   note         = "Required title is missing", 
-}
-
-@TECHREPORT{techreport-full,
-   author = "Tom T{\'{e}}rrific",
-   title = "An {$O(n \log n / \! \log\log n)$} Sorting Algorithm",
-   institution = "Fanstord University",
-   type = "Wishful Research Result",
-   number = "7",
-   address = "Computer Science Department, Fanstord, California",
-   month = oct,
-   year = 1988,
-   note = "A full TECHREPORT entry",
-}
-
-@TECHREPORT{Nelson1999, 
-   author       = "J. Nelson", 
-   type         = "{TWI Report}", 
-   number       = "666/1999",
-   institution  = "", 
-   year         = jan # "~1999", 
-   
-   note         = "Required institution missing", 
-}
-
-@TECHREPORT{Fields2005, 
-   author       = "W. K. Fields", 
-   type         = "{ECE Report No.}", 
-   number       = "AL944",
-   institution  = "", 
-   year         = "2005", 
-   
-   note         = "Required institution missing", 
-}
-
-@MISC{Zalkins2008, 
-
-   author       = "Y. M. Zalkins", 
-   title        = "", 
-   howpublished = "e-print arXiv:cond-mat/040426", 
-   month        = "", 
-   year         = "2008", 
-   note         = "",
-}
-
-@MISC{Nelson2005, 
-
-   author       = "J. Nelson", 
-   howpublished = "{U.S. Patent No.} 5,693,000", 
-   year         = "12~" # dec # "~2005", 
-}
-
-@MASTERSTHESIS{Nelson1999a,
-   author       = "J. K. Nelson", 
-   title        = "", 
-   school       = "New York University", 
-   year         = "1999", 
-   
-   type         = "M.{S}. thesis", 
-   address      = "", 
-   month        = "", 
-   note         = "", 
-}
-
-@MASTERSTHESIS{mastersthesis-full,
-   author = "{\'{E}}douard Masterly",
-   title = "Mastering Thesis Writing",
-   school = "Stanford University",
-   type = "Master's project",
-   address = "English Department",
-   month = jun # "-" # aug,
-   year = 1988,
-   note = "A full MASTERSTHESIS entry",
-}
-
-@PHDTHESIS{Smith2003,
-   author       = "S. M. Smith", 
-   title        = "", 
-   school       = "Massachusetts Institute of  Technology", 
-   year         = "2003", 
-   
-   type         = "{Ph.D.} thesis", 
-   address      = "", 
-   month        = "", 
-   note         = "", 
-}
-
-@ARTICLE{KawaLin2003,
-   author       = "S. R. Kawa and S.-J. Lin", 
-   title        = "", 
-   journal      = "J. Geophys. Res.", 
-   year         = "2003", 
-
-   volume       = "108", 
-   number       = "D6", 
-   pages        = "4201", 
-   month        = "", 
-   note         = "{DOI:10.1029/2002JD002268}", 
-}
-
-@PHDTHESIS{phdthesis-full,
-   author = "F. Phidias Phony-Baloney",
-   title = "Fighting Fire with Fire: Festooning {F}rench Phrases",
-   school = "Fanstord University",
-   type = "{PhD} Dissertation",
-   address = "Department of French",
-   month = jun # "-" # aug,
-   year = 1988,
-   note = "A full PHDTHESIS entry",
-}
-
-@BOOK{book-full,
-   author = "Donald E. Knuth",
-   title = "Seminumerical Algorithms",
-   volume = 2,
-   series = "The Art of Computer Programming",
-   publisher = "Addison-Wesley",
-   address = "Reading, Massachusetts",
-   edition = "Second",
-   month = "10~" # jan,
-   year = "\noopsort{1973c}1981",
-   note = "A full BOOK entry",
-}
-
-@BOOKLET{booklet-full,
-   author = "Jill C. Knvth",
-   title = "The Programming of Computer Art",
-   howpublished = "Vernier Art Center",
-   address = "Stanford, California",
-   month = feb,
-   year = 1988,
-   note = "A full BOOKLET entry",
-}
-
-@INBOOK{ballagh2000,
-   author    = "R. Ballagh and C.M. Savage",
-   editor    = "C.M. Savage and M. Das",
-   title     = "Bose-Einstein condensation: from atomic physics to quantum fluids, Proceedings of the 13th Physics Summer School",
-   year      = "2000",
-   publisher = "World Scientific",
-   address   = "Singapore",
-   eprint    = "cond-mat/0008070",
-}
-
-@INCOLLECTION{ballagh2000a,
-   author    = "R. Ballagh and C.M. Savage",
-   title     = "Bose-Einstein condensation: from atomic physics to quantum fluids",
-   editor    = "C.M. Savage and M. Das",
-   booktitle = "Proceedings of the 13th Physics Summer School",
-   year      = "2000",
-   publisher = "World Scientific",
-   address   = "Singapore",
-   eprint    = "cond-mat/0008070",
-}
-
-@inBook{Magnetism,
-   author    = "W. Opechowski and R. Guccione",
-   title     = "Introduction to the Theory of Normal Metals",
-   volume    = "IIa",
-   pages     = "105",
-   editor    = "G. T. Rado and H. Suhl",
-   booktitle = "Magnetism",
-   publisher = "Academic Press",
-   address   = "New York",
-   year      = "1965",
-}
-
-@INCOLLECTION{Magnetisma,
-   author    = "W. Opechowski and R. Guccione",
-   title     = "Introduction to the Theory of Normal Metals",
-   editor    = "G. T. Rado and H. Suhl",
-   booktitle = "Magnetism",
-   volume    = "IIa",
-   pages     = "105",
-   publisher = "Academic Press",
-   address   = "New York",
-   year      = "1965",
-}
-
-@INPROCEEDINGS{Magnetismb,
-   author    = "W. Opechowski and R. Guccione",
-   title     = "Introduction to the Theory of Normal Metals",
-   editor    = "G. T. Rado and H. Suhl",
-   booktitle = "Magnetism",
-   volume    = "IIa",
-   pages     = "105",
-   publisher = "Academic Press",
-   address   = "New York",
-   year      = "1965",
-}
-
-@INBOOK{Smith80,
-   author    = "J. M. Smith",
-   title     = "Molecular Dynamics",
-   publisher = "Academic",
-   year      = "1980",
-   address   = "New York",
-   editor    = "C. Brown",
-}
-
-@article{ZS71,
-   author    = "V. E. Zakharov and A. B. Shabat",
-   title     = "Exact theory of two-dimensional self-focusing and one-dimensional self-modulation of waves in nonlinear media",
-   journal   = "Zh. Eksp. Teor. Fiz.",
-   volume    = "61",
-   year      = "1971",
-   pages     = "118--134",
-   translation = "Sov. Phys. JETP \textbf{34}, 62 (1972)"
-}
-
-@INCOLLECTION{Smith80a,
-   author    = "J. M. Smith",
-   booktitle = "Molecular Dynamics",
-   editor    = "C. Brown",
-   publisher = "Academic",
-   year      = "1980",
-   address   = "New York",
-}
-
-@INCOLLECTION{incollection-full,
-   author = "Daniel D. Lincoll",
-   title = "Semigroups of Recurrences",
-   editor = "David J. Lipcoll and D. H. Lawrie and A. H. Sameh",
-   booktitle = "High Speed Computer and Algorithm Organization",
-   number = 23,
-   series = "Fast Computers",
-   chapter = 3,
-   type = "Part",
-   pages = "179--183",
-   publisher = "Academic Press",
-   address = "New York",
-   edition = "Third",
-   month = sep,
-   year = 1977,
-   note = "A full INCOLLECTION entry",
-}
-
-@INPROCEEDINGS{inproceedings-full,
-   author = "Alfred V. Oaho and Jeffrey D. Ullman and Mihalis Yannakakis",
-   title = "On Notions of Information Transfer in {VLSI} Circuits",
-   editor = "Wizard V. Oz and Mihalis Yannakakis",
-   booktitle = "Proc. Fifteenth Annual ACM",
-   bookaddress = "Boston, 1982", 
-   number = 17,
-   series = "All ACM Conferences",
-   pages = "133--139",
-   month = mar,
-   year = 1983,
-   address = "New York",
-   organization = "ACM",
-   publisher = "Academic Press",
-   note = "A full INPROCEDINGS entry",
-}
-
-@MANUAL{manual-full,
-   author = "Larry Manmaker",
-   title = "The Definitive Computer Manual",
-   organization = "Chips-R-Us",
-   address = "Silicon Valley",
-   edition = "Silver",
-   month = apr # "-" # may,
-   year = 1986,
-   note = "A full MANUAL entry",
-}
diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.pdf b/texmf/doc/latex/revtex/sample/aps/apssamp.pdf
deleted file mode 100644
index 3e11f39..0000000
--- a/texmf/doc/latex/revtex/sample/aps/apssamp.pdf
+++ /dev/null
diff --git a/texmf/doc/latex/revtex/sample/aps/apssamp.tex b/texmf/doc/latex/revtex/sample/aps/apssamp.tex
deleted file mode 100644
index ae2eb52..0000000
--- a/texmf/doc/latex/revtex/sample/aps/apssamp.tex
+++ /dev/null
@@ -1,753 +0,0 @@
-% ****** Start of file apssamp.tex ******
-%
-%   This file is part of the APS files in the REVTeX 4.2 distribution.
-%   Version 4.2a of REVTeX, December 2014
-%
-%   Copyright (c) 2014 The American Physical Society.
-%
-%   See the REVTeX 4 README file for restrictions and more information.
-%
-% TeX'ing this file requires that you have AMS-LaTeX 2.0 installed
-% as well as the rest of the prerequisites for REVTeX 4.2
-%
-% See the REVTeX 4 README file
-% It also requires running BibTeX. The commands are as follows:
-%
-%  1)  latex apssamp.tex
-%  2)  bibtex apssamp
-%  3)  latex apssamp.tex
-%  4)  latex apssamp.tex
-%
-\documentclass[%
- reprint,
-%superscriptaddress,
-%groupedaddress,
-%unsortedaddress,
-%runinaddress,
-%frontmatterverbose, 
-%preprint,
-%preprintnumbers,
-%nofootinbib,
-%nobibnotes,
-%bibnotes,
- amsmath,amssymb,
- aps,
-%pra,
-%prb,
-%rmp,
-%prstab,
-%prstper,
-%floatfix,
-]{revtex4-2}
-
-\usepackage{graphicx}% Include figure files
-\usepackage{dcolumn}% Align table columns on decimal point
-\usepackage{bm}% bold math
-%\usepackage{hyperref}% add hypertext capabilities
-%\usepackage[mathlines]{lineno}% Enable numbering of text and display math
-%\linenumbers\relax % Commence numbering lines
-
-%\usepackage[showframe,%Uncomment any one of the following lines to test 
-%%scale=0.7, marginratio={1:1, 2:3}, ignoreall,% default settings
-%%text={7in,10in},centering,
-%%margin=1.5in,
-%%total={6.5in,8.75in}, top=1.2in, left=0.9in, includefoot,
-%%height=10in,a5paper,hmargin={3cm,0.8in},
-%]{geometry}
-
-\begin{document}
-
-\preprint{APS/123-QED}
-
-\title{Manuscript Title:\\with Forced Linebreak}% Force line breaks with \\
-\thanks{A footnote to the article title}%
-
-\author{Ann Author}
- \altaffiliation[Also at ]{Physics Department, XYZ University.}%Lines break automatically or can be forced with \\
-\author{Second Author}%
- \email{Second.Author@institution.edu}
-\affiliation{%
- Authors' institution and/or address\\
- This line break forced with \textbackslash\textbackslash
-}%
-
-\collaboration{MUSO Collaboration}%\noaffiliation
-
-\author{Charlie Author}
- \homepage{http://www.Second.institution.edu/~Charlie.Author}
-\affiliation{
- Second institution and/or address\\
- This line break forced% with \\
-}%
-\affiliation{
- Third institution, the second for Charlie Author
-}%
-\author{Delta Author}
-\affiliation{%
- Authors' institution and/or address\\
- This line break forced with \textbackslash\textbackslash
-}%
-
-\collaboration{CLEO Collaboration}%\noaffiliation
-
-\date{\today}% It is always \today, today,
-             %  but any date may be explicitly specified
-
-\begin{abstract}
-An article usually includes an abstract, a concise summary of the work
-covered at length in the main body of the article. 
-\begin{description}
-\item[Usage]
-Secondary publications and information retrieval purposes.
-\item[Structure]
-You may use the \texttt{description} environment to structure your abstract;
-use the optional argument of the \verb+\item+ command to give the category of each item. 
-\end{description}
-\end{abstract}
-
-%\keywords{Suggested keywords}%Use showkeys class option if keyword
-                              %display desired
-\maketitle
-
-%\tableofcontents
-
-\section{\label{sec:level1}First-level heading:\protect\\ The line
-break was forced \lowercase{via} \textbackslash\textbackslash}
-
-This sample document demonstrates proper use of REV\TeX~4.2 (and
-\LaTeXe) in mansucripts prepared for submission to APS
-journals. Further information can be found in the REV\TeX~4.2
-documentation included in the distribution or available at
-\url{http://journals.aps.org/revtex/}.
-
-When commands are referred to in this example file, they are always
-shown with their required arguments, using normal \TeX{} format. In
-this format, \verb+#1+, \verb+#2+, etc. stand for required
-author-supplied arguments to commands. For example, in
-\verb+\section{#1}+ the \verb+#1+ stands for the title text of the
-author's section heading, and in \verb+\title{#1}+ the \verb+#1+
-stands for the title text of the paper.
-
-Line breaks in section headings at all levels can be introduced using
-\textbackslash\textbackslash. A blank input line tells \TeX\ that the
-paragraph has ended. Note that top-level section headings are
-automatically uppercased. If a specific letter or word should appear in
-lowercase instead, you must escape it using \verb+\lowercase{#1}+ as
-in the word ``via'' above.
-
-\subsection{\label{sec:level2}Second-level heading: Formatting}
-
-This file may be formatted in either the \texttt{preprint} or
-\texttt{reprint} style. \texttt{reprint} format mimics final journal output. 
-Either format may be used for submission purposes. \texttt{letter} sized paper should
-be used when submitting to APS journals.
-
-\subsubsection{Wide text (A level-3 head)}
-The \texttt{widetext} environment will make the text the width of the
-full page, as on page~\pageref{eq:wideeq}. (Note the use the
-\verb+\pageref{#1}+ command to refer to the page number.) 
-\paragraph{Note (Fourth-level head is run in)}
-The width-changing commands only take effect in two-column formatting. 
-There is no effect if text is in a single column.
-
-\subsection{\label{sec:citeref}Citations and References}
-A citation in text uses the command \verb+\cite{#1}+ or
-\verb+\onlinecite{#1}+ and refers to an entry in the bibliography. 
-An entry in the bibliography is a reference to another document.
-
-\subsubsection{Citations}
-Because REV\TeX\ uses the \verb+natbib+ package of Patrick Daly, 
-the entire repertoire of commands in that package are available for your document;
-see the \verb+natbib+ documentation for further details. Please note that
-REV\TeX\ requires version 8.31a or later of \verb+natbib+.
-
-\paragraph{Syntax}
-The argument of \verb+\cite+ may be a single \emph{key}, 
-or may consist of a comma-separated list of keys.
-The citation \emph{key} may contain 
-letters, numbers, the dash (-) character, or the period (.) character. 
-New with natbib 8.3 is an extension to the syntax that allows for 
-a star (*) form and two optional arguments on the citation key itself.
-The syntax of the \verb+\cite+ command is thus (informally stated)
-\begin{quotation}\flushleft\leftskip1em
-\verb+\cite+ \verb+{+ \emph{key} \verb+}+, or\\
-\verb+\cite+ \verb+{+ \emph{optarg+key} \verb+}+, or\\
-\verb+\cite+ \verb+{+ \emph{optarg+key} \verb+,+ \emph{optarg+key}\ldots \verb+}+,
-\end{quotation}\noindent
-where \emph{optarg+key} signifies 
-\begin{quotation}\flushleft\leftskip1em
-\emph{key}, or\\
-\texttt{*}\emph{key}, or\\
-\texttt{[}\emph{pre}\texttt{]}\emph{key}, or\\
-\texttt{[}\emph{pre}\texttt{]}\texttt{[}\emph{post}\texttt{]}\emph{key}, or even\\
-\texttt{*}\texttt{[}\emph{pre}\texttt{]}\texttt{[}\emph{post}\texttt{]}\emph{key}.
-\end{quotation}\noindent
-where \emph{pre} and \emph{post} is whatever text you wish to place 
-at the beginning and end, respectively, of the bibliographic reference
-(see Ref.~[\onlinecite{witten2001}] and the two under Ref.~[\onlinecite{feyn54}]).
-(Keep in mind that no automatic space or punctuation is applied.)
-It is highly recommended that you put the entire \emph{pre} or \emph{post} portion 
-within its own set of braces, for example: 
-\verb+\cite+ \verb+{+ \texttt{[} \verb+{+\emph{text}\verb+}+\texttt{]}\emph{key}\verb+}+.
-The extra set of braces will keep \LaTeX\ out of trouble if your \emph{text} contains the comma (,) character.
-
-The star (*) modifier to the \emph{key} signifies that the reference is to be 
-merged with the previous reference into a single bibliographic entry, 
-a common idiom in APS and AIP articles (see below, Ref.~[\onlinecite{epr}]). 
-When references are merged in this way, they are separated by a semicolon instead of 
-the period (full stop) that would otherwise appear.
-
-\paragraph{Eliding repeated information}
-When a reference is merged, some of its fields may be elided: for example, 
-when the author matches that of the previous reference, it is omitted. 
-If both author and journal match, both are omitted.
-If the journal matches, but the author does not, the journal is replaced by \emph{ibid.},
-as exemplified by Ref.~[\onlinecite{epr}]. 
-These rules embody common editorial practice in APS and AIP journals and will only
-be in effect if the markup features of the APS and AIP Bib\TeX\ styles is employed.
-
-\paragraph{The options of the cite command itself}
-Please note that optional arguments to the \emph{key} change the reference in the bibliography, 
-not the citation in the body of the document. 
-For the latter, use the optional arguments of the \verb+\cite+ command itself:
-\verb+\cite+ \texttt{*}\allowbreak
-\texttt{[}\emph{pre-cite}\texttt{]}\allowbreak
-\texttt{[}\emph{post-cite}\texttt{]}\allowbreak
-\verb+{+\emph{key-list}\verb+}+.
-
-\subsubsection{Example citations}
-By default, citations are numerical\cite{Beutler1994}.
-Author-year citations are used when the journal is RMP. 
-To give a textual citation, use \verb+\onlinecite{#1}+: 
-Refs.~\onlinecite{[][{, and references therein}]witten2001,Bire82}. 
-By default, the \texttt{natbib} package automatically sorts your citations into numerical order and ``compresses'' runs of three or more consecutive numerical citations.
-REV\TeX\ provides the ability to automatically change the punctuation when switching between journal styles that provide citations in square brackets and those that use a superscript style instead. This is done through the \texttt{citeautoscript} option. For instance, the journal style \texttt{prb} automatically invokes this option because \textit{Physical 
-Review B} uses superscript-style citations. The effect is to move the punctuation, which normally comes after a citation in square brackets, to its proper position before the superscript. 
-To illustrate, we cite several together 
-\cite{[See the explanation of time travel in ]feyn54,*[The classical relativistic treatment of ][ is a relative classic]epr,witten2001,Berman1983,Davies1998,Bire82}, 
-and once again in different order (Refs.~\cite{epr,feyn54,Bire82,Berman1983,witten2001,Davies1998}). 
-Note that the citations were both compressed and sorted. Futhermore, running this sample file under the \texttt{prb} option will move the punctuation to the correct place.
-
-When the \verb+prb+ class option is used, the \verb+\cite{#1}+ command
-displays the reference's number as a superscript rather than in
-square brackets. Note that the location of the \verb+\cite{#1}+
-command should be adjusted for the reference style: the superscript
-references in \verb+prb+ style must appear after punctuation;
-otherwise the reference must appear before any punctuation. This
-sample was written for the regular (non-\texttt{prb}) citation style.
-The command \verb+\onlinecite{#1}+ in the \texttt{prb} style also
-displays the reference on the baseline.
-
-\subsubsection{References}
-A reference in the bibliography is specified by a \verb+\bibitem{#1}+ command
-with the same argument as the \verb+\cite{#1}+ command.
-\verb+\bibitem{#1}+ commands may be crafted by hand or, preferably,
-generated by Bib\TeX. 
-REV\TeX~4.2 includes Bib\TeX\ style files
-\verb+apsrev4-2.bst+, \verb+apsrmp4-2.bst+ appropriate for
-\textit{Physical Review} and \textit{Reviews of Modern Physics},
-respectively.
-
-\subsubsection{Example references}
-This sample file employs the \verb+\bibliography+ command, 
-which formats the \texttt{\jobname .bbl} file
-and specifies which bibliographic databases are to be used by Bib\TeX\ 
-(one of these should be by arXiv convention \texttt{\jobname .bib}).
-Running Bib\TeX\ (via \texttt{bibtex \jobname}) 
-after the first pass of \LaTeX\ produces the file
-\texttt{\jobname .bbl} which contains the automatically formatted
-\verb+\bibitem+ commands (including extra markup information via
-\verb+\bibinfo+ and \verb+\bibfield+ commands). 
-If not using Bib\TeX, you will have to create the \verb+thebibiliography+ environment 
-and its \verb+\bibitem+ commands by hand.
-
-Numerous examples of the use of the APS bibliographic entry types appear in the bibliography of this sample document.
-You can refer to the \texttt{\jobname .bib} file, 
-and compare its information to the formatted bibliography itself.
-
-\subsection{Footnotes}%
-Footnotes, produced using the \verb+\footnote{#1}+ command, 
-usually integrated into the bibliography alongside the other entries.
-Numerical citation styles do this%
-\footnote{Automatically placing footnotes into the bibliography requires using BibTeX to compile the bibliography.};
-author-year citation styles place the footnote at the bottom of the text column.
-Note: due to the method used to place footnotes in the bibliography, 
-\emph{you must re-run Bib\TeX\ every time you change any of your document's footnotes}. 
-
-\section{Math and Equations}
-Inline math may be typeset using the \verb+$+ delimiters. Bold math
-symbols may be achieved using the \verb+bm+ package and the
-\verb+\bm{#1}+ command it supplies. For instance, a bold $\alpha$ can
-be typeset as \verb+$\bm{\alpha}$+ giving $\bm{\alpha}$. Fraktur and
-Blackboard (or open face or double struck) characters should be
-typeset using the \verb+\mathfrak{#1}+ and \verb+\mathbb{#1}+ commands
-respectively. Both are supplied by the \texttt{amssymb} package. For
-example, \verb+$\mathbb{R}$+ gives $\mathbb{R}$ and
-\verb+$\mathfrak{G}$+ gives $\mathfrak{G}$
-
-In \LaTeX\ there are many different ways to display equations, and a
-few preferred ways are noted below. Displayed math will center by
-default. Use the class option \verb+fleqn+ to flush equations left.
-
-Below we have numbered single-line equations; this is the most common
-type of equation in \textit{Physical Review}:
-\begin{eqnarray}
-\chi_+(p)\alt{\bf [}2|{\bf p}|(|{\bf p}|+p_z){\bf ]}^{-1/2}
-\left(
-\begin{array}{c}
-|{\bf p}|+p_z\\
-px+ip_y
-\end{array}\right)\;,
-\\
-\left\{%
- \openone234567890abc123\alpha\beta\gamma\delta1234556\alpha\beta
- \frac{1\sum^{a}_{b}}{A^2}%
-\right\}%
-\label{eq:one}.
-\end{eqnarray}
-Note the open one in Eq.~(\ref{eq:one}).
-
-Not all numbered equations will fit within a narrow column this
-way. The equation number will move down automatically if it cannot fit
-on the same line with a one-line equation:
-\begin{equation}
-\left\{
- ab12345678abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta
- \frac{1\sum^{a}_{b}}{A^2}%
-\right\}.
-\end{equation}
-
-When the \verb+\label{#1}+ command is used [cf. input for
-Eq.~(\ref{eq:one})], the equation can be referred to in text without
-knowing the equation number that \TeX\ will assign to it. Just
-use \verb+\ref{#1}+, where \verb+#1+ is the same name that used in
-the \verb+\label{#1}+ command.
-
-Unnumbered single-line equations can be typeset
-using the \verb+\[+, \verb+\]+ format:
-\[g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow
-q^+g^+g^+ \dots ~. \]
-
-
-\subsection{Multiline equations}
-
-Multiline equations are obtained by using the \verb+eqnarray+
-environment.  Use the \verb+\nonumber+ command at the end of each line
-to avoid assigning a number:
-\begin{eqnarray}
-{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1}
-\delta_{\sigma_1,-\sigma_2}
-(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\
-&&\times
-[\epsilon_jl_i\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1),
-\end{eqnarray}
-\begin{eqnarray}
-\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2}
-        (N^2-1)\nonumber \\
- & &\times \left( \sum_{i<j}\right)
-  \sum_{\text{perm}}
- \frac{1}{S_{12}}
- \frac{1}{S_{12}}
- \sum_\tau c^f_\tau~.
-\end{eqnarray}
-\textbf{Note:} Do not use \verb+\label{#1}+ on a line of a multiline
-equation if \verb+\nonumber+ is also used on that line. Incorrect
-cross-referencing will result. Notice the use \verb+\text{#1}+ for
-using a Roman font within a math environment.
-
-To set a multiline equation without \emph{any} equation
-numbers, use the \verb+\begin{eqnarray*}+,
-\verb+\end{eqnarray*}+ format:
-\begin{eqnarray*}
-\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2}
-        (N^2-1)\\
- & &\times \left( \sum_{i<j}\right)
- \left(
-  \sum_{\text{perm}}\frac{1}{S_{12}S_{23}S_{n1}}
- \right)
- \frac{1}{S_{12}}~.
-\end{eqnarray*}
-
-To obtain numbers not normally produced by the automatic numbering,
-use the \verb+\tag{#1}+ command, where \verb+#1+ is the desired
-equation number. For example, to get an equation number of
-(\ref{eq:mynum}),
-\begin{equation}
-g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow
-q^+g^+g^+ \dots ~. \tag{2.6$'$}\label{eq:mynum}
-\end{equation}
-
-\paragraph{A few notes on \texttt{tag}s} 
-\verb+\tag{#1}+ requires the \texttt{amsmath} package. 
-Place the \verb+\tag{#1}+ command before the \verb+\label{#1}+, if any. 
-The numbering produced by \verb+\tag{#1}+ \textit{does not affect} 
-the automatic numbering in REV\TeX; 
-therefore, the number must be known ahead of time, 
-and it must be manually adjusted if other equations are added. 
-\verb+\tag{#1}+ works with both single-line and multiline equations. 
-\verb+\tag{#1}+ should only be used in exceptional cases---%
-do not use it to number many equations in your paper. 
-Please note that this feature of the \texttt{amsmath} package
-is \emph{not} compatible with the \texttt{hyperref} (6.77u) package.
-
-Enclosing display math within
-\verb+\begin{subequations}+ and \verb+\end{subequations}+ will produce
-a set of equations that are labeled with letters, as shown in
-Eqs.~(\ref{subeq:1}) and (\ref{subeq:2}) below.
-You may include any number of single-line and multiline equations,
-although it is probably not a good idea to follow one display math
-directly after another.
-\begin{subequations}
-\label{eq:whole}
-\begin{eqnarray}
-{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1}
-(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\
-&&\times
-[\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1).\label{subeq:2}
-\end{eqnarray}
-\begin{equation}
-\left\{
- abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta
- \frac{1\sum^{a}_{b}}{A^2}
-\right\},\label{subeq:1}
-\end{equation}
-\end{subequations}
-Giving a \verb+\label{#1}+ command directly after the \verb+\begin{subequations}+, 
-allows you to reference all the equations in the \texttt{subequations} environment. 
-For example, the equations in the preceding subequations environment were
-Eqs.~(\ref{eq:whole}).
-
-\subsubsection{Wide equations}
-The equation that follows is set in a wide format, i.e., it spans the full page. 
-The wide format is reserved for long equations
-that cannot easily be set in a single column:
-\begin{widetext}
-\begin{equation}
-{\cal R}^{(\text{d})}=
- g_{\sigma_2}^e
- \left(
-   \frac{[\Gamma^Z(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2}
-  +\frac{[\Gamma^Z(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2}
- \right)
- + x_WQ_e
- \left(
-   \frac{[\Gamma^\gamma(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2}
-  +\frac{[\Gamma^\gamma(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2}
- \right)\;. 
- \label{eq:wideeq}
-\end{equation}
-\end{widetext}
-This is typed to show how the output appears in wide format.
-(Incidentally, since there is no blank line between the \texttt{equation} environment above 
-and the start of this paragraph, this paragraph is not indented.)
-
-\section{Cross-referencing}
-REV\TeX{} will automatically number such things as
-sections, footnotes, equations, figure captions, and table captions. 
-In order to reference them in text, use the
-\verb+\label{#1}+ and \verb+\ref{#1}+ commands. 
-To reference a particular page, use the \verb+\pageref{#1}+ command.
-
-The \verb+\label{#1}+ should appear 
-within the section heading, 
-within the footnote text, 
-within the equation, or 
-within the table or figure caption. 
-The \verb+\ref{#1}+ command
-is used in text at the point where the reference is to be displayed.  
-Some examples: Section~\ref{sec:level1} on page~\pageref{sec:level1},
-Table~\ref{tab:table1},%
-\begin{table}[b]%The best place to locate the table environment is directly after its first reference in text
-\caption{\label{tab:table1}%
-A table that fits into a single column of a two-column layout. 
-Note that REV\TeX~4 adjusts the intercolumn spacing so that the table fills the
-entire width of the column. Table captions are numbered
-automatically. 
-This table illustrates left-, center-, decimal- and right-aligned columns,
-along with the use of the \texttt{ruledtabular} environment which sets the 
-Scotch (double) rules above and below the alignment, per APS style.
-}
-\begin{ruledtabular}
-\begin{tabular}{lcdr}
-\textrm{Left\footnote{Note a.}}&
-\textrm{Centered\footnote{Note b.}}&
-\multicolumn{1}{c}{\textrm{Decimal}}&
-\textrm{Right}\\
-\colrule
-1 & 2 & 3.001 & 4\\
-10 & 20 & 30 & 40\\
-100 & 200 & 300.0 & 400\\
-\end{tabular}
-\end{ruledtabular}
-\end{table}
-and Fig.~\ref{fig:epsart}.%
-\begin{figure}[b]
-\includegraphics{fig_1}% Here is how to import EPS art
-\caption{\label{fig:epsart} A figure caption. The figure captions are
-automatically numbered.}
-\end{figure}
-
-\section{Floats: Figures, Tables, Videos, etc.}
-Figures and tables are usually allowed to ``float'', which means that their
-placement is determined by \LaTeX, while the document is being typeset. 
-
-Use the \texttt{figure} environment for a figure, the \texttt{table} environment for a table.
-In each case, use the \verb+\caption+ command within to give the text of the
-figure or table caption along with the \verb+\label+ command to provide
-a key for referring to this figure or table.
-The typical content of a figure is an image of some kind; 
-that of a table is an alignment.%
-\begin{figure*}
-\includegraphics{fig_2}% Here is how to import EPS art
-\caption{\label{fig:wide}Use the figure* environment to get a wide
-figure that spans the page in \texttt{twocolumn} formatting.}
-\end{figure*}
-\begin{table*}
-\caption{\label{tab:table3}This is a wide table that spans the full page
-width in a two-column layout. It is formatted using the
-\texttt{table*} environment. It also demonstates the use of
-\textbackslash\texttt{multicolumn} in rows with entries that span
-more than one column.}
-\begin{ruledtabular}
-\begin{tabular}{ccccc}
- &\multicolumn{2}{c}{$D_{4h}^1$}&\multicolumn{2}{c}{$D_{4h}^5$}\\
- Ion&1st alternative&2nd alternative&lst alternative
-&2nd alternative\\ \hline
- K&$(2e)+(2f)$&$(4i)$ &$(2c)+(2d)$&$(4f)$ \\
- Mn&$(2g)$\footnote{The $z$ parameter of these positions is $z\sim\frac{1}{4}$.}
- &$(a)+(b)+(c)+(d)$&$(4e)$&$(2a)+(2b)$\\
- Cl&$(a)+(b)+(c)+(d)$&$(2g)$\footnotemark[1]
- &$(4e)^{\text{a}}$\\
- He&$(8r)^{\text{a}}$&$(4j)^{\text{a}}$&$(4g)^{\text{a}}$\\
- Ag& &$(4k)^{\text{a}}$& &$(4h)^{\text{a}}$\\
-\end{tabular}
-\end{ruledtabular}
-\end{table*}
-
-Insert an image using either the \texttt{graphics} or
-\texttt{graphix} packages, which define the \verb+\includegraphics{#1}+ command.
-(The two packages differ in respect of the optional arguments 
-used to specify the orientation, scaling, and translation of the image.) 
-To create an alignment, use the \texttt{tabular} environment. 
-
-The best place to locate the \texttt{figure} or \texttt{table} environment
-is immediately following its first reference in text; this sample document
-illustrates this practice for Fig.~\ref{fig:epsart}, which
-shows a figure that is small enough to fit in a single column. 
-
-In exceptional cases, you will need to move the float earlier in the document, as was done
-with Table~\ref{tab:table3}: \LaTeX's float placement algorithms need to know
-about a full-page-width float earlier. 
-
-Fig.~\ref{fig:wide}
-has content that is too wide for a single column,
-so the \texttt{figure*} environment has been used.%
-\begin{table}[b]
-\caption{\label{tab:table4}%
-Numbers in columns Three--Five are aligned with the ``d'' column specifier 
-(requires the \texttt{dcolumn} package). 
-Non-numeric entries (those entries without a ``.'') in a ``d'' column are aligned on the decimal point. 
-Use the ``D'' specifier for more complex layouts. }
-\begin{ruledtabular}
-\begin{tabular}{ccddd}
-One&Two&
-\multicolumn{1}{c}{\textrm{Three}}&
-\multicolumn{1}{c}{\textrm{Four}}&
-\multicolumn{1}{c}{\textrm{Five}}\\
-%\mbox{Three}&\mbox{Four}&\mbox{Five}\\
-\hline
-one&two&\mbox{three}&\mbox{four}&\mbox{five}\\
-He&2& 2.77234 & 45672. & 0.69 \\
-C\footnote{Some tables require footnotes.}
-  &C\footnote{Some tables need more than one footnote.}
-  & 12537.64 & 37.66345 & 86.37 \\
-\end{tabular}
-\end{ruledtabular}
-\end{table}
-
-The content of a table is typically a \texttt{tabular} environment, 
-giving rows of type in aligned columns. 
-Column entries separated by \verb+&+'s, and 
-each row ends with \textbackslash\textbackslash. 
-The required argument for the \texttt{tabular} environment
-specifies how data are aligned in the columns. 
-For instance, entries may be centered, left-justified, right-justified, aligned on a decimal
-point. 
-Extra column-spacing may be be specified as well, 
-although REV\TeX~4 sets this spacing so that the columns fill the width of the
-table. Horizontal rules are typeset using the \verb+\hline+
-command. The doubled (or Scotch) rules that appear at the top and
-bottom of a table can be achieved enclosing the \texttt{tabular}
-environment within a \texttt{ruledtabular} environment. Rows whose
-columns span multiple columns can be typeset using the
-\verb+\multicolumn{#1}{#2}{#3}+ command (for example, see the first
-row of Table~\ref{tab:table3}).%
-
-Tables~\ref{tab:table1}, \ref{tab:table3}, \ref{tab:table4}, and \ref{tab:table2}%
-\begin{table}[b]
-\caption{\label{tab:table2}
-A table with numerous columns that still fits into a single column. 
-Here, several entries share the same footnote. 
-Inspect the \LaTeX\ input for this table to see exactly how it is done.}
-\begin{ruledtabular}
-\begin{tabular}{cccccccc}
- &$r_c$ (\AA)&$r_0$ (\AA)&$\kappa r_0$&
- &$r_c$ (\AA) &$r_0$ (\AA)&$\kappa r_0$\\
-\hline
-Cu& 0.800 & 14.10 & 2.550 &Sn\footnotemark[1]
-& 0.680 & 1.870 & 3.700 \\
-Ag& 0.990 & 15.90 & 2.710 &Pb\footnotemark[2]
-& 0.450 & 1.930 & 3.760 \\
-Au& 1.150 & 15.90 & 2.710 &Ca\footnotemark[3]
-& 0.750 & 2.170 & 3.560 \\
-Mg& 0.490 & 17.60 & 3.200 &Sr\footnotemark[4]
-& 0.900 & 2.370 & 3.720 \\
-Zn& 0.300 & 15.20 & 2.970 &Li\footnotemark[2]
-& 0.380 & 1.730 & 2.830 \\
-Cd& 0.530 & 17.10 & 3.160 &Na\footnotemark[5]
-& 0.760 & 2.110 & 3.120 \\
-Hg& 0.550 & 17.80 & 3.220 &K\footnotemark[5]
-&  1.120 & 2.620 & 3.480 \\
-Al& 0.230 & 15.80 & 3.240 &Rb\footnotemark[3]
-& 1.330 & 2.800 & 3.590 \\
-Ga& 0.310 & 16.70 & 3.330 &Cs\footnotemark[4]
-& 1.420 & 3.030 & 3.740 \\
-In& 0.460 & 18.40 & 3.500 &Ba\footnotemark[5]
-& 0.960 & 2.460 & 3.780 \\
-Tl& 0.480 & 18.90 & 3.550 & & & & \\
-\end{tabular}
-\end{ruledtabular}
-\footnotetext[1]{Here's the first, from Ref.~\onlinecite{feyn54}.}
-\footnotetext[2]{Here's the second.}
-\footnotetext[3]{Here's the third.}
-\footnotetext[4]{Here's the fourth.}
-\footnotetext[5]{And etc.}
-\end{table}
-show various effects.
-A table that fits in a single column employs the \texttt{table}
-environment. 
-Table~\ref{tab:table3} is a wide table, set with the \texttt{table*} environment. 
-Long tables may need to break across pages. 
-The most straightforward way to accomplish this is to specify
-the \verb+[H]+ float placement on the \texttt{table} or
-\texttt{table*} environment. 
-However, the \LaTeXe\ package \texttt{longtable} allows headers and footers to be specified for each page of the table. 
-A simple example of the use of \texttt{longtable} can be found
-in the file \texttt{summary.tex} that is included with the REV\TeX~4
-distribution.
-
-There are two methods for setting footnotes within a table (these
-footnotes will be displayed directly below the table rather than at
-the bottom of the page or in the bibliography). The easiest
-and preferred method is just to use the \verb+\footnote{#1}+
-command. This will automatically enumerate the footnotes with
-lowercase roman letters. However, it is sometimes necessary to have
-multiple entries in the table share the same footnote. In this case,
-there is no choice but to manually create the footnotes using
-\verb+\footnotemark[#1]+ and \verb+\footnotetext[#1]{#2}+.
-\texttt{\#1} is a numeric value. Each time the same value for
-\texttt{\#1} is used, the same mark is produced in the table. The
-\verb+\footnotetext[#1]{#2}+ commands are placed after the \texttt{tabular}
-environment. Examine the \LaTeX\ source and output for
-Tables~\ref{tab:table1} and \ref{tab:table2}
-for examples.
-
-Video~\ref{vid:PRSTPER.4.010101} 
-illustrates several features new with REV\TeX4.2,
-starting with the \texttt{video} environment, which is in the same category with
-\texttt{figure} and \texttt{table}.%
-\begin{video}
-\href{http://prst-per.aps.org/multimedia/PRSTPER/v4/i1/e010101/e010101_vid1a.mpg}{\includegraphics{vid_1a}}%
- \quad
-\href{http://prst-per.aps.org/multimedia/PRSTPER/v4/i1/e010101/e010101_vid1b.mpg}{\includegraphics{vid_1b}}
- \setfloatlink{http://link.aps.org/multimedia/PRSTPER/v4/i1/e010101}%
- \caption{\label{vid:PRSTPER.4.010101}%
-  Students explain their initial idea about Newton's third law to a teaching assistant. 
-  Clip (a): same force.
-  Clip (b): move backwards.
- }%
-\end{video}
-The \verb+\setfloatlink+ command causes the title of the video to be a hyperlink to the
-indicated URL; it may be used with any environment that takes the \verb+\caption+
-command.
-The \verb+\href+ command has the same significance as it does in the context of
-the \texttt{hyperref} package: the second argument is a piece of text to be 
-typeset in your document; the first is its hyperlink, a URL.
-
-\textit{Physical Review} style requires that the initial citation of
-figures or tables be in numerical order in text, so don't cite
-Fig.~\ref{fig:wide} until Fig.~\ref{fig:epsart} has been cited.
-
-\begin{acknowledgments}
-We wish to acknowledge the support of the author community in using
-REV\TeX{}, offering suggestions and encouragement, testing new versions,
-\dots.
-\end{acknowledgments}
-
-\appendix
-
-\section{Appendixes}
-
-To start the appendixes, use the \verb+\appendix+ command.
-This signals that all following section commands refer to appendixes
-instead of regular sections. Therefore, the \verb+\appendix+ command
-should be used only once---to setup the section commands to act as
-appendixes. Thereafter normal section commands are used. The heading
-for a section can be left empty. For example,
-\begin{verbatim}
-\appendix
-\section{}
-\end{verbatim}
-will produce an appendix heading that says ``APPENDIX A'' and
-\begin{verbatim}
-\appendix
-\section{Background}
-\end{verbatim}
-will produce an appendix heading that says ``APPENDIX A: BACKGROUND''
-(note that the colon is set automatically).
-
-If there is only one appendix, then the letter ``A'' should not
-appear. This is suppressed by using the star version of the appendix
-command (\verb+\appendix*+ in the place of \verb+\appendix+).
-
-\section{A little more on appendixes}
-
-Observe that this appendix was started by using
-\begin{verbatim}
-\section{A little more on appendixes}
-\end{verbatim}
-
-Note the equation number in an appendix:
-\begin{equation}
-E=mc^2.
-\end{equation}
-
-\subsection{\label{app:subsec}A subsection in an appendix}
-
-You can use a subsection or subsubsection in an appendix. Note the
-numbering: we are now in Appendix~\ref{app:subsec}.
-
-Note the equation numbers in this appendix, produced with the
-subequations environment:
-\begin{subequations}
-\begin{eqnarray}
-E&=&mc, \label{appa}
-\\
-E&=&mc^2, \label{appb}
-\\
-E&\agt& mc^3. \label{appc}
-\end{eqnarray}
-\end{subequations}
-They turn out to be Eqs.~(\ref{appa}), (\ref{appb}), and (\ref{appc}).
-
-% The \nocite command causes all entries in a bibliography to be printed out
-% whether or not they are actually referenced in the text. This is appropriate
-% for the sample file to show the different styles of references, but authors
-% most likely will not want to use it.
-\nocite{*}
-
-\bibliography{apssamp}% Produces the bibliography via BibTeX.
-
-\end{document}
-%
-% ****** End of file apssamp.tex ******
diff --git a/texmf/doc/latex/revtex/sample/aps/apstemplate.tex b/texmf/doc/latex/revtex/sample/aps/apstemplate.tex
deleted file mode 100644
index 84d3435..0000000
--- a/texmf/doc/latex/revtex/sample/aps/apstemplate.tex
+++ /dev/null
@@ -1,173 +0,0 @@
-%% ****** Start of file apstemplate.tex ****** %
-%%
-%%
-%%   This file is part of the APS files in the REVTeX 4.2 distribution.
-%%   Version 4.2a of REVTeX, January, 2015
-%%
-%%
-%%   Copyright (c) 2015 The American Physical Society.
-%%
-%%   See the REVTeX 4 README file for restrictions and more information.
-%%
-%
-% This is a template for producing manuscripts for use with REVTEX 4.2
-% Copy this file to another name and then work on that file.
-% That way, you always have this original template file to use.
-%
-% Group addresses by affiliation; use superscriptaddress for long
-% author lists, or if there are many overlapping affiliations.
-% For Phys. Rev. appearance, change preprint to twocolumn.
-% Choose pra, prb, prc, prd, pre, prl, prstab, prstper, or rmp for journal
-%  Add 'draft' option to mark overfull boxes with black boxes
-%  Add 'showkeys' option to make keywords appear
-\documentclass[aps,prl,preprint,groupedaddress]{revtex4-2}
-%\documentclass[aps,prl,preprint,superscriptaddress]{revtex4-2}
-%\documentclass[aps,prl,reprint,groupedaddress]{revtex4-2}
-
-% You should use BibTeX and apsrev.bst for references
-% Choosing a journal automatically selects the correct APS
-% BibTeX style file (bst file), so only uncomment the line
-% below if necessary.
-%\bibliographystyle{apsrev4-2}
-
-\begin{document}
-
-% Use the \preprint command to place your local institutional report
-% number in the upper righthand corner of the title page in preprint mode.
-% Multiple \preprint commands are allowed.
-% Use the 'preprintnumbers' class option to override journal defaults
-% to display numbers if necessary
-%\preprint{}
-
-%Title of paper
-\title{}
-
-% repeat the \author .. \affiliation  etc. as needed
-% \email, \thanks, \homepage, \altaffiliation all apply to the current
-% author. Explanatory text should go in the []'s, actual e-mail
-% address or url should go in the {}'s for \email and \homepage.
-% Please use the appropriate macro foreach each type of information
-
-% \affiliation command applies to all authors since the last
-% \affiliation command. The \affiliation command should follow the
-% other information
-% \affiliation can be followed by \email, \homepage, \thanks as well.
-\author{}
-%\email[]{Your e-mail address}
-%\homepage[]{Your web page}
-%\thanks{}
-%\altaffiliation{}
-\affiliation{}
-
-%Collaboration name if desired (requires use of superscriptaddress
-%option in \documentclass). \noaffiliation is required (may also be
-%used with the \author command).
-%\collaboration can be followed by \email, \homepage, \thanks as well.
-%\collaboration{}
-%\noaffiliation
-
-\date{\today}
-
-\begin{abstract}
-% insert abstract here
-\end{abstract}
-
-% insert suggested keywords - APS authors don't need to do this
-%\keywords{}
-
-%\maketitle must follow title, authors, abstract, and keywords
-\maketitle
-
-% body of paper here - Use proper section commands
-% References should be done using the \cite, \ref, and \label commands
-\section{}
-% Put \label in argument of \section for cross-referencing
-%\section{\label{}}
-\subsection{}
-\subsubsection{}
-
-% If in two-column mode, this environment will change to single-column
-% format so that long equations can be displayed. Use
-% sparingly.
-%\begin{widetext}
-% put long equation here
-%\end{widetext}
-
-% figures should be put into the text as floats.
-% Use the graphics or graphicx packages (distributed with LaTeX2e)
-% and the \includegraphics macro defined in those packages.
-% See the LaTeX Graphics Companion by Michel Goosens, Sebastian Rahtz,
-% and Frank Mittelbach for instance.
-%
-% Here is an example of the general form of a figure:
-% Fill in the caption in the braces of the \caption{} command. Put the label
-% that you will use with \ref{} command in the braces of the \label{} command.
-% Use the figure* environment if the figure should span across the
-% entire page. There is no need to do explicit centering.
-
-% \begin{figure}
-% \includegraphics{}%
-% \caption{\label{}}
-% \end{figure}
-
-% Surround figure environment with turnpage environment for landscape
-% figure
-% \begin{turnpage}
-% \begin{figure}
-% \includegraphics{}%
-% \caption{\label{}}
-% \end{figure}
-% \end{turnpage}
-
-% tables should appear as floats within the text
-%
-% Here is an example of the general form of a table:
-% Fill in the caption in the braces of the \caption{} command. Put the label
-% that you will use with \ref{} command in the braces of the \label{} command.
-% Insert the column specifiers (l, r, c, d, etc.) in the empty braces of the
-% \begin{tabular}{} command.
-% The ruledtabular enviroment adds doubled rules to table and sets a
-% reasonable default table settings.
-% Use the table* environment to get a full-width table in two-column
-% Add \usepackage{longtable} and the longtable (or longtable*}
-% environment for nicely formatted long tables. Or use the the [H]
-% placement option to break a long table (with less control than 
-% in longtable).
-% \begin{table}%[H] add [H] placement to break table across pages
-% \caption{\label{}}
-% \begin{ruledtabular}
-% \begin{tabular}{}
-% Lines of table here ending with \\
-% \end{tabular}
-% \end{ruledtabular}
-% \end{table}
-
-% Surround table environment with turnpage environment for landscape
-% table
-% \begin{turnpage}
-% \begin{table}
-% \caption{\label{}}
-% \begin{ruledtabular}
-% \begin{tabular}{}
-% \end{tabular}
-% \end{ruledtabular}
-% \end{table}
-% \end{turnpage}
-
-% Specify following sections are appendices. Use \appendix* if there
-% only one appendix.
-%\appendix
-%\section{}
-
-% If you have acknowledgments, this puts in the proper section head.
-%\begin{acknowledgments}
-% put your acknowledgments here.
-%\end{acknowledgments}
-
-% Create the reference section using BibTeX:
-\bibliography{basename of .bib file}
-
-\end{document}
-%
-% ****** End of file apstemplate.tex ******
-
diff --git a/texmf/doc/latex/revtex/sample/aps/fig_1.eps b/texmf/doc/latex/revtex/sample/aps/fig_1.eps
deleted file mode 100644
index 2cd6074..0000000
--- a/texmf/doc/latex/revtex/sample/aps/fig_1.eps
+++ /dev/null
@@ -1,5 +0,0 @@
-%!PS-Adobe-3.0
-%%BoundingBox: 0 0 100 100
-0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke
-20 50 moveto /Times-Roman findfont 10 scalefont setfont (Test Figure) show
-%%EOF
diff --git a/texmf/doc/latex/revtex/sample/aps/fig_2.eps b/texmf/doc/latex/revtex/sample/aps/fig_2.eps
deleted file mode 100644
index eb637e2..0000000
--- a/texmf/doc/latex/revtex/sample/aps/fig_2.eps
+++ /dev/null
@@ -1,5 +0,0 @@
-%!PS-Adobe-3.0
-%%BoundingBox: 0 0 500 80
-0 0 moveto 500 0 lineto 500 80 lineto 0 80 lineto 0 0 lineto stroke
-200 40 moveto /Times-Roman findfont 10 scalefont setfont (Wide Test Figure) show
-%%EOF
diff --git a/texmf/doc/latex/revtex/sample/aps/vid_1a.eps b/texmf/doc/latex/revtex/sample/aps/vid_1a.eps
deleted file mode 100644
index 2388bd4..0000000
--- a/texmf/doc/latex/revtex/sample/aps/vid_1a.eps
+++ /dev/null
@@ -1,5 +0,0 @@
-%!PS-Adobe-3.0
-%%BoundingBox: 0 0 100 100
-0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke
-20 50 moveto /Times-Roman findfont 10 scalefont setfont (Clip A Frame) show
-%%EOF
diff --git a/texmf/doc/latex/revtex/sample/aps/vid_1b.eps b/texmf/doc/latex/revtex/sample/aps/vid_1b.eps
deleted file mode 100644
index a64a6dc..0000000
--- a/texmf/doc/latex/revtex/sample/aps/vid_1b.eps
+++ /dev/null
@@ -1,5 +0,0 @@
-%!PS-Adobe-3.0
-%%BoundingBox: 0 0 100 100
-0 0 moveto 100 0 lineto 100 100 lineto 0 100 lineto 0 0 lineto stroke
-20 50 moveto /Times-Roman findfont 10 scalefont setfont (Clip B Frame) show
-%%EOF